CAD CAM EDM DRO - Yahoo Group Archive

Re: Rack and pinion

Posted by jcc3inc
on 2002-09-30 07:15:46 UTC
--- In CAD_CAM_EDM_DRO@y..., "cdoughtynz" <cdoughty@p...> wrote:
> Hi All,
> who has the best supplies of rack and spur gears?
> Colin

Dear Sir:
In the business I used to own, we bought our rack from Standard Steel
Specialty Co. in Duncan, SC, Phone 803-486-9500. We used 14-1/2
degree racks for replacement, but 20 degree on new applications.
Sized used were 1/2 x 1/2 and 3/4 x 3/4. I checked the accuracy of
sample 6 foot pieces and found accuracy better than .005" over the 6
foot length. For our drive pinions, we had them made to our specs
and either through hardened or nitrided to around Rockwell 60C.
Boston Gear makes a variety of non-hardened pinions as does Browning
Gear.
If you need the smaller "instrument" type, Allied Devices, Baldwin,
NY, 516-223-9100 has good prices and quality. PIC Design and Berg
also make the instrument type pinions and racks.
If you are certain of your needs, I can be more specific, and you can
contact me off list.
Jack C.

Discussion Thread

cdoughtynz 2002-09-29 11:58:52 UTC Rack and pinion William Scalione 2002-09-29 12:09:52 UTC Re: [CAD_CAM_EDM_DRO] Rack and pinion Marv Frankel 2002-09-29 12:24:37 UTC Re: [CAD_CAM_EDM_DRO] Rack and pinion cdoughtynz 2002-09-29 12:37:40 UTC Re: Rack and pinion stevenson_engineers 2002-09-29 12:58:14 UTC Re: Rack and pinion cnc002@a... 2002-09-29 19:53:04 UTC Re: [CAD_CAM_EDM_DRO] Rack and pinion jcc3inc 2002-09-30 07:15:46 UTC Re: Rack and pinion dex367 2003-12-02 04:10:24 UTC Rack and pinion jcc3inc 2003-12-02 07:05:29 UTC Re: Rack and pinion bgamin 2003-12-02 09:55:48 UTC Re: Rack and pinion JanRwl@A... 2003-12-03 10:16:48 UTC Re: [CAD_CAM_EDM_DRO] Rack and pinion Chris Brick 2003-12-03 10:26:14 UTC Re: [CAD_CAM_EDM_DRO] Rack and pinion dex367 2003-12-04 08:00:31 UTC Re: Rack and pinion bsjoelund 2003-12-04 08:19:05 UTC Re: Rack and pinion JanRwl@A... 2003-12-04 09:39:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Rack and pinion Chris Brick 2003-12-04 10:43:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Rack and pinion cut_cl42 2003-12-04 11:04:11 UTC Re: Rack and pinion stevenson_engineers 2003-12-04 15:28:24 UTC Re: Rack and pinion Dave Fisher 2003-12-04 17:34:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Rack and pinion Thomas Fritz 2003-12-04 19:02:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Rack and pinion cut_cl42 2003-12-04 19:29:13 UTC Re: Rack and pinion IMService 2003-12-06 14:33:16 UTC Re: Re: Re: Rack and pinion cnc002@a... 2003-12-06 14:52:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Rack and pinion