Re: Gecko Reset/Manager Again

I've heard of low parport voltages like this being common to laptops. Is
that also true of newer motherboards with low voltage processors?

Ray

>    From: "dakota8833" <dakota8833@...>
> Subject: Gecko Reset/Manager Again
>
> Well the circuit is up and running. But a noticed only 3.51 volts on
> the ERROR pins. Mariss states a voltage lower than 3.25 will fault the
> drives ( pull all to 0 volts ). I thought I should see at least 5
> volts here. .25 volts is cutting it close. Had some random faults ,
> mostly during PC boot up. Anyone build this circuit, does it work
> correctly ??
>
> Frank