Re: what's better?
Posted by
dakota8833
on 2002-10-12 07:43:51 UTC
> > Let us knowWell I'm a little thick headed checking my math in metric ,...... so
> >
> > Frank
>
> well, I've test it and found out that I really need a 2:1 ratio to
> increase torque, it will need 5000 mm/min rapids, and I have a 10mm
> pitch ballscrew on it.
> It would be ideal if I can keep 0.01mm accuracy using a 500ppr
> encoder and a 2;1 ratio using RUTEX servo drives.
> I have the servo drive and the motor and the ballscrew it can not
> be changed, but the gear ratio.
> software is desknc or deskncwin.
>
> motor is running (i guess) direct connect at about 2000 rpm. max.
intill someone else steps in , go here
http://www.electrosales.com/catalog01.html and get this free neat
program called CAMAS,(Warner Electic).
Sorry ,.... Frank
Discussion Thread
afogassa
2002-10-09 20:40:16 UTC
what's better?
Jon Elson
2002-10-10 23:32:23 UTC
Re: [CAD_CAM_EDM_DRO] what's better?
dakota8833
2002-10-11 10:57:55 UTC
Re: what's better?
afogassa
2002-10-11 16:43:33 UTC
Re: what's better?
dakota8833
2002-10-12 07:43:51 UTC
Re: what's better?