Re: [CAD_CAM_EDM_DRO] Re: DRO encoders- Rotary or Linear?
Posted by
John A. McFadden
on 2002-10-29 12:58:04 UTC
Instead of using a rack and pinion, would it be possible to use a rigid bar
(like 1" or 1.5" drill rod) and a rubber roller mounted to a rotary encoder?
With a solid bar, wipes could be used to clear the surface before the roller
passed over it, unlike the rack and pinion where clearing it would be a
difficult measure at best if something were to get in the teeth.
John
(like 1" or 1.5" drill rod) and a rubber roller mounted to a rotary encoder?
With a solid bar, wipes could be used to clear the surface before the roller
passed over it, unlike the rack and pinion where clearing it would be a
difficult measure at best if something were to get in the teeth.
John
Discussion Thread
Roger Linscheid
2002-10-28 18:49:39 UTC
DRO encoders- Rotary or Linear?
jcc3inc
2002-10-29 06:44:30 UTC
Re: DRO encoders- Rotary or Linear?
alex
2002-10-29 07:47:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: DRO encoders- Rotary or Linear?
John A. McFadden
2002-10-29 12:58:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: DRO encoders- Rotary or Linear?
Matt Shaver
2002-10-29 21:15:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: DRO encoders- Rotary or Linear?
Raymond Heckert
2002-10-29 21:29:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: DRO encoders- Rotary or Linear?
Raymond Heckert
2002-10-29 21:29:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: DRO encoders- Rotary or Linear?
Jon Elson
2002-10-29 23:08:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: DRO encoders- Rotary or Linear?
Jon Elson
2002-10-29 23:30:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: DRO encoders- Rotary or Linear?
John A. McFadden
2002-10-30 04:22:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: DRO encoders- Rotary or Linear?
bjammin@i...
2002-10-30 04:35:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: DRO encoders- Rotary or Linear?
gittt2000
2002-10-30 05:42:30 UTC
Re: DRO encoders- Rotary or Linear?
alex
2002-10-30 06:48:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: DRO encoders- Rotary or Linear?
alex
2002-10-30 06:49:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: DRO encoders- Rotary or Linear?
Tim Goldstein
2002-10-30 10:25:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: DRO encoders- Rotary or Linear?
Jon Elson
2002-10-30 10:34:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: DRO encoders- Rotary or Linear?