Re: [CAD_CAM_EDM_DRO] CAD/CAM questions
Posted by
Jon Elson
on 2002-11-12 22:14:43 UTC
southstar66067 wrote:
machine, but just the
conversion of CAD to RS-274D (alias G-code) to control my CNC program.
I have not seen
this problem with my use.
If you are not doing complicated 3-D surfaces, You may not need anything
but the EzTrak.
It can take the sequence of operations in conversational mode, and you
don't use a CAD or
CAM package. That is how our shop at work uses it.
Jon
>Hi,I have Ver. 16.1 of Bobcad/cam. I don't use it for movement of the
>I'm new to this group and also new to CNC & CAD/CAM. I just got a
>Bridgeport EZTRAK 3 axis mill and I'm looking at CAD/CAM software. I
>was looking at CAPSmill, Bobcad & FeatureMill when I came across this
>group. I did a search and have read a lot of the posts here about
>software and see that Dolphin and Vector are the favorites at this
>group.
>I'm just using the machine for a hobby so Featuremill is out of my
>price range. I was leaning towards the Bobcad because of their 4 cd
>training package and my inexperience. How is the training for
>Dolphin and Vector?
>Are there truly a lot of differences between the software's when you
>are a hobbyist? On one of the posts someone mentioned a problem with
>random movement of the Z-axis with Bobcad and that Vector was a
>similar design.
>
machine, but just the
conversion of CAD to RS-274D (alias G-code) to control my CNC program.
I have not seen
this problem with my use.
If you are not doing complicated 3-D surfaces, You may not need anything
but the EzTrak.
It can take the sequence of operations in conversational mode, and you
don't use a CAD or
CAM package. That is how our shop at work uses it.
Jon
Discussion Thread
southstar66067
2002-11-12 15:26:18 UTC
CAD/CAM questions
mueller914
2002-11-12 22:08:22 UTC
Re: CAD/CAM questions
Tim Goldstein
2002-11-12 22:12:50 UTC
RE: [CAD_CAM_EDM_DRO] Re: CAD/CAM questions
Jon Elson
2002-11-12 22:14:43 UTC
Re: [CAD_CAM_EDM_DRO] CAD/CAM questions
stevenson_engineers
2002-11-12 23:50:10 UTC
Re: CAD/CAM questions
Larry Ragan
2002-11-13 07:46:42 UTC
RE: [CAD_CAM_EDM_DRO] CAD/CAM questions
CL
2002-11-13 09:16:05 UTC
Re: [CAD_CAM_EDM_DRO] CAD/CAM questions
Alan Marconett KM6VV
2002-11-13 11:25:57 UTC
Re: [CAD_CAM_EDM_DRO] CAD/CAM questions
Keith Rumley
2002-11-13 15:03:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: CAD/CAM questions
narentaj
2002-11-14 23:59:39 UTC
Re: CAD/CAM questions
stevenson_engineers
2002-11-15 01:59:02 UTC
Re: CAD/CAM questions
narentaj
2002-11-15 03:32:37 UTC
Re: CAD/CAM questions
stevenson_engineers
2002-11-15 05:52:49 UTC
Re: CAD/CAM questions
Raymond Heckert
2002-11-15 20:47:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: CAD/CAM questions