CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Ball Screw Options

Posted by Les Watts
on 2002-11-15 05:37:54 UTC
Hi Mark

I took a look at your new machine and it looks like a nice score!

Although I like our Phillie resins products and Moglice I can confirm
that they would require new unworn screws as Jon mentioned.

So I would certainly recommend a ballscrew conversion kit. The
ends are already machined and the nut bracket is (hopefully)
ready to bolt on. Machining ballscrew ends requires tenths
tolerances on RC60 hardened steel and special setups.

HIWIN makes a ballscrew conversion kit for 9x32 Bridgeport.
It consists of part # B2505x-32 and B2505-9. I don't know if
it is a perfect retrofit but you can do a search and find out.
I think it is in the $800 range. Sorry- this is an expensive
little hobby!

I think someone on the list is distributing HIWIN products
(Bob Campbell?) so you can check here with the screws.
And if you recall I have proper sized servos for such a
machine.

Les

Leslie Watts
L M Watts Furniture
Tiger, Georgia USA
http://www.alltel.net/~leswatts/wattsfurniturewp.html
engineering page:
http://www.alltel.net/~leswatts/shop.html

----- Original Message -----
From: "natchamp_87" <mark@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, November 15, 2002 1:53 AM
Subject: [CAD_CAM_EDM_DRO] Re: Ball Screw Options


> Thanks for the info Jon, It isn't a round ram. I asked what the y
> travel was b4 I purchased. You can see it at:
> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=1785720326&rd=1
>
> So it looks like I will be installing real ball screws. I took a look
> at Reidtools, as per a previous message by Jim. Why couldn't I use
> the AR-315 ball nut? It is on page 366 here:
> http://www.reidtool.com/Pdf/category/power.pdf

Discussion Thread

natchamp_87 2002-11-14 20:38:02 UTC Ball Screw Options Marv Frankel 2002-11-14 20:53:20 UTC Re: [CAD_CAM_EDM_DRO] Ball Screw Options natchamp_87 2002-11-14 21:09:37 UTC Re: Ball Screw Options Jim Brown 2002-11-14 21:47:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball Screw Options Jon Elson 2002-11-14 22:16:44 UTC Re: [CAD_CAM_EDM_DRO] Ball Screw Options natchamp_87 2002-11-14 22:53:41 UTC Re: Ball Screw Options Marv Frankel 2002-11-15 00:11:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball Screw Options Les Watts 2002-11-15 05:37:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball Screw Options natchamp_87 2002-11-15 08:06:40 UTC Re: Ball Screw Options alex 2002-11-15 08:22:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball Screw Options Jim Brown 2002-11-15 08:40:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball Screw Options Jim Brown 2002-11-15 08:51:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball Screw Options Les Watts 2002-11-15 09:13:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball Screw Options Les Watts 2002-11-15 09:23:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball Screw Options Peter 2002-11-15 09:34:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball Screw Options Andrew Werby 2002-11-15 10:19:34 UTC Re: Ball Screw Options Jon Elson 2002-11-15 11:15:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball Screw Options alex 2002-11-15 15:30:40 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball Screw Options JanRwl@A... 2002-11-15 17:32:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball Screw Options