Re: [CAD_CAM_EDM_DRO] Re: Cost estimate for machining of acme screws

Hi, in N.H. you can get CNC lathe work for $60.00 an hour, and general
machinist such as my friend Gary goes from $35.00 to $55 per hour depending,
he does weld all types, lathes to 24 inch diam. mills including CNC
including rebuild, repair, remachine, prototype. N.H. is definately up
north. cul brian f.

----- Original Message -----
From: "stevenson_engineers" <machines@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, November 16, 2002 5:49 AM
Subject: [CAD_CAM_EDM_DRO] Re: Cost estimate for machining of acme screws


> >--- In CAD_CAM_EDM_DRO@y..., Jon Elson <elson@p...> wrote:
> > >In a message dated 11/15/2002 8:32:38 PM Central Standard Time,
> > >thomasm923@a... writes:
> > >Tom: Here (Houston), the smaller shops charge $100 and more per
> >hour, and
> > >most have a "$100 minimum".
> > >
> > >It wouldn't surprise me to read/hear that SOME busy shops "up
> >north" charge
> > >on up to $250/hour for "routine work" even a 3-year apprentice can
> >handle!
> > >
> > >
> > From what I hear, there are NO busy shops! Everything is slow,
> >most of
> > the machinists and
> > tool and die makers I know are laid off.
> >
>
> Going rate here for shop work is from $30 manual to $45 for CNC work.
> Firm just up the road from here has just installed 7 brand new Deckel
> maching centres and they are working flat out 24/7 on Boeing work.
> That's just how it is.
> I charge $33 across the board.
>
> John S.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>