CAD CAM EDM DRO - Yahoo Group Archive

Re: ATX supply for other uses

Posted by Greg Nuspel
on 2000-02-07 16:02:34 UTC
Hans,

Yes I found a place on the web that had the pin out for the connector in
it there is a wire that is grounded to turn on the power supply. I
hooked this up to a switch all works fine. I have made a new set of
boards they use a crystal oscillator on the splitter board for an
interrupt for windows. So I also to a 20 kHz signal for the chopper from
there. It seems to be working fine. I needed the interrupt signal in
order to run this one program.

Glad to hear the boards are fine.
--
Greg Nuspel

"Make everything as simple as possible, but not simpler. "
- Albert Einstein (1879-1955)

http://members.home.net/gregsdiversions
ICQ 13585790

Discussion Thread

Multi-Volti Devices 2000-02-06 20:40:10 UTC ATX supply for other uses Greg Nuspel 2000-02-07 04:14:12 UTC Re: ATX supply for other uses hansw 2000-02-07 06:25:56 UTC Re: ATX supply for other uses Greg Nuspel 2000-02-07 16:02:34 UTC Re: ATX supply for other uses