Re: [CAD_CAM_EDM_DRO] Motor cable

Hi,

Try

http://www.mcmaster.com/

refer to page 680 or do a search for "flexible control cable"

At 11:16 AM 1/6/2003 -0800, you wrote:

>Hi,
>I have my Sherline/Xylotex/Mach1 system up and running.....finally! The
>cable I found and used for the leads to the motors from the driver is 4
>conductor, foil shielded with a ground lead next to the shield. The problem
>is that this cable is not very flexible.
>Any suggestions for a more flexible cable and where to get it? I would like
>to get enough and of a suitable size that I can use it on my BP size
>mill/drill later on. I will probably use steppers on it also.
>
>Thanks, PJH
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects
>goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to
>reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/