Re: 5 volts in Geckos G201?????
Posted by
ralaco <ralaco@y...
on 2003-01-18 14:40:54 UTC
Mariss:
I have tried:
Pin 1 got 3.44 volts
Pin 2 got 1.743 volts
Pin 14 got 1.743 volts
Before I connect them to the geckos I get 5 volts
The problem is I can't make run the motors with Mach1.
But if I use another PC with Indexer LPT, runs fine.
Could the low voltage in the optos make not to run the motors?
Regards
Raul Lara
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Mariss Freimanis
<mariss92705@y...>" <mariss92705@y...> wrote:
I have tried:
Pin 1 got 3.44 volts
Pin 2 got 1.743 volts
Pin 14 got 1.743 volts
Before I connect them to the geckos I get 5 volts
The problem is I can't make run the motors with Mach1.
But if I use another PC with Indexer LPT, runs fine.
Could the low voltage in the optos make not to run the motors?
Regards
Raul Lara
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Mariss Freimanis
<mariss92705@y...>" <mariss92705@y...> wrote:
> Raul,connect
>
> Are you using pin 1 from the game port?
>
> Mariss
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "ralaco <ralaco@y...>"
> <ralaco@y...> wrote:
> > I'm getting the 5 volts for the Gecko G201 optos from the PC game
> > port.
> > I got 5 volts before I connect it to the Gecko, but once I
> > the line in the Gecko
> > The voltage drops to 1.743 volts.
> >
> > Is that ok?
> > If not
> > What could be the cause?
> >
> > Best regards
> > Raul Lara
Discussion Thread
ralaco <ralaco@y...
2003-01-18 13:58:45 UTC
5 volts in Geckos G201?????
Tim Goldstein
2003-01-18 14:06:06 UTC
RE: [CAD_CAM_EDM_DRO] 5 volts in Geckos G201?????
Mariss Freimanis <mariss92705@y...
2003-01-18 14:25:05 UTC
Re: 5 volts in Geckos G201?????
ralaco <ralaco@y...
2003-01-18 14:40:54 UTC
Re: 5 volts in Geckos G201?????
ralaco <ralaco@y...
2003-01-18 14:47:15 UTC
Re: 5 volts in Geckos G201?????
Art
2003-01-18 14:57:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: 5 volts in Geckos G201?????
Russ Waters
2003-01-18 14:57:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: 5 volts in Geckos G201?????
Mariss Freimanis <mariss92705@y...
2003-01-18 15:09:38 UTC
Re: 5 volts in Geckos G201?????
Mariss Freimanis <mariss92705@y...
2003-01-18 15:11:59 UTC
Re: 5 volts in Geckos G201?????
ralaco <ralaco@y...
2003-01-18 15:12:48 UTC
Re: 5 volts in Geckos G201?????
turbulatordude <davemucha@j...
2003-01-18 15:19:50 UTC
Re: 5 volts in Geckos G201?????
ralaco <ralaco@y...
2003-01-18 15:20:39 UTC
Re: 5 volts in Geckos G201?????
Tim Goldstein
2003-01-18 15:31:27 UTC
RE: [CAD_CAM_EDM_DRO] Re: 5 volts in Geckos G201?????
Alan Marconett KM6VV
2003-01-18 15:35:09 UTC
Re: [CAD_CAM_EDM_DRO] 5 volts in Geckos G201?????
ralaco <ralaco@y...
2003-01-18 17:25:36 UTC
Re: 5 volts in Geckos G201????? to MARISS
Mariss Freimanis <mariss92705@y...
2003-01-18 18:19:06 UTC
Re: 5 volts in Geckos G201????? to MARISS
ralaco <ralaco@y...
2003-01-18 19:11:35 UTC
Re: 5 volts in Geckos G201????? to MARISS
JanRwl@A...
2003-01-19 13:31:19 UTC
Re: [CAD_CAM_EDM_DRO] 5 volts in Geckos G201?????