Re: [CAD_CAM_EDM_DRO] 5 volts in Geckos G201?????

Hi Raul,

That's BAD! What are you connecting it to? I know this works, I've
used it myself for a 4-axis driver box.

Perhaps you've got the wrong pin on the joystick connector? Or perhaps
it's not a joystick connector at all... Network cards use a 15 pin
connector for the transciever.

Alan KM6VV

"ralaco " wrote:

>
> I'm getting the 5 volts for the Gecko G201 optos from the PC game
> port.
> I got 5 volts before I connect it to the Gecko, but once I connect
> the line in the Gecko
> The voltage drops to 1.743 volts.
>
> Is that ok?
> If not
> What could be the cause?
>
> Best regards
> Raul Lara
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/