Re: EMC question
Posted by
jmkasunich <jmkasunich@y...
on 2003-01-22 07:11:34 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Ray Henry <rehenry@u...>
wrote:
Occaisional interrupt latency on the order of 30mS. It was
losing serial link characters (overrun) even at 2400 baud.
Switched to a 233MHz Pentium, identical software, runs
fine at 115,200 baud. I'm guessing it's a funky motherboard,
although I'll investigate some more before I scrap it.
John Kasunich
wrote:
> A fellow on the emc list had what I think of as similarI have a Pentium II 300MHz machine with similar weirdness.
> problems with a PC not keeping up with reading encoders.
> (Both reading encoders and computing stepping pulses are
> done on the rt side of the shared memory buffer.) In
> theory, there isn't much that can get in the way of these
> things happening. He fixed the problem with a different
> motherboard.
Occaisional interrupt latency on the order of 30mS. It was
losing serial link characters (overrun) even at 2400 baud.
Switched to a 233MHz Pentium, identical software, runs
fine at 115,200 baud. I'm guessing it's a funky motherboard,
although I'll investigate some more before I scrap it.
John Kasunich
Discussion Thread
krnldmp <krnldmp@y...
2003-01-21 17:57:51 UTC
EMC question
Tim Goldstein
2003-01-21 18:04:31 UTC
RE: [CAD_CAM_EDM_DRO] EMC question
krnldmp <krnldmp@y...
2003-01-21 18:21:35 UTC
Re: EMC question
krnldmp <krnldmp@y...
2003-01-21 18:31:46 UTC
Re: EMC question
Matt Shaver
2003-01-21 21:45:05 UTC
Re: [CAD_CAM_EDM_DRO] EMC question
Ray Henry
2003-01-22 06:49:42 UTC
Re: Re: EMC question
jmkasunich <jmkasunich@y...
2003-01-22 07:11:34 UTC
Re: EMC question
krnldmp <krnldmp@y...
2003-01-22 08:02:55 UTC
Re: EMC question
krnldmp <krnldmp@y...
2003-01-22 08:27:15 UTC
Re: EMC question
Jon Elson
2003-01-22 09:49:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC question
Ray Henry
2003-01-22 10:28:16 UTC
Re: Re: EMC question
Ray Henry
2003-01-22 10:43:43 UTC
Re: Re: EMC question
jmkasunich <jmkasunich@y...
2003-01-22 12:09:17 UTC
Re: EMC question
j.guenther
2003-01-22 12:18:42 UTC
RE: [CAD_CAM_EDM_DRO] Re: EMC question
krnldmp <krnldmp@y...
2003-01-22 13:30:51 UTC
Re: EMC question