Re: [CAD_CAM_EDM_DRO] Re: Anaheim Automation Question
Posted by
CL
on 2003-01-30 06:11:24 UTC
Alan Trest wrote:
old Digital Tool Router. Unfortunately, my numbers are all rubbed off,
and My Folder for the Router has nothing from Anahiem in it, only old
Digital Stuff.
If yours were 4 axis units, there would be four terminals. The Clockwise
is really "Step", the Counterclockwise is "Direction"..........
I have connected Flashcut to a handful of these units and there has
never been a problem. Pretty straight forward. I can Fax you the Diagram
of how FC would connect to them if you send me a private e-mail with a
Fax number.
Hope that helps,
Chris L
admin@...
>Thats the one.I currently have one of those, but a four Driver one, connected to an
>Art says it is a Stepper Driver, one is two axis and the other is a
>single axis. It evidently has a built-in power supply and Drives a
>1000oz stepper in x-ray machine.
>
>Do you have any specs or documentation??
>
old Digital Tool Router. Unfortunately, my numbers are all rubbed off,
and My Folder for the Router has nothing from Anahiem in it, only old
Digital Stuff.
If yours were 4 axis units, there would be four terminals. The Clockwise
is really "Step", the Counterclockwise is "Direction"..........
I have connected Flashcut to a handful of these units and there has
never been a problem. Pretty straight forward. I can Fax you the Diagram
of how FC would connect to them if you send me a private e-mail with a
Fax number.
Hope that helps,
Chris L
admin@...
Discussion Thread
Alan Trest <cncprojects0@h...
2003-01-29 16:01:26 UTC
Anaheim Automation Question
Chris L
2003-01-29 17:44:06 UTC
Re: [CAD_CAM_EDM_DRO] Anaheim Automation Question
Alan Trest <cncprojects0@h...
2003-01-29 18:12:32 UTC
Re: Anaheim Automation Question
Mariss Freimanis <mariss92705@y...
2003-01-29 18:17:40 UTC
Re: Anaheim Automation Question
Bill Higdon
2003-01-29 18:46:56 UTC
Re: [CAD_CAM_EDM_DRO] Anaheim Automation Question
Alan Trest <cncprojects0@h...
2003-01-29 19:14:39 UTC
Re: Anaheim Automation Question
Bill Higdon
2003-01-29 19:49:31 UTC
Re: [CAD_CAM_EDM_DRO] Anaheim Automation Question
Alan Trest <cncprojects0@h...
2003-01-29 19:52:12 UTC
Re: Anaheim Automation Question
CL
2003-01-30 06:11:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Anaheim Automation Question
Bill Higdon
2003-01-30 07:53:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Anaheim Automation Question
ballendo <ballendo@y...
2003-01-31 07:17:56 UTC
Re: Anaheim Automation Question