Re: Slightly o/t - Booting to DOS

you can change the line in the msdos.sys file boot gui =0 this will
cause the os to always boot to dos. to change it back you must use
edit fron the command line .
--mark

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude
<davemucha@j...>" <davemucha@j...> wrote:

> Me too.
>
> I use a DOS boot disk in the floppy for DOS or pull it out for Win.
>
> I do know that you can tap (repeatidly) the F8 key while booting to
> get to the selection screen, just after the CMOS test, and before

the

> first Win splash screen. Not a good fix, but workable.
>
> My problem is that for T-CNC I want not run Emm386 or Himem to let

T-

> CNC work with slightly better performance. And that would need a
> seperate autoexec.bat and config.sys files
>
>
> Dave
>
>
>
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Andrew Mawson

<andrew@m...>"

> <andrew@m...> wrote:
> > Sorry for the (slightly) off topic post, but I want to set up a

PC

> to
> > run TurboCNC in DOS, that also has WIN98SE already loaded.
> >
> > How can I get it to give a menu at boot, that defaults to DOS

after

> a
> > timeout, but allows me to select WIN98 if I choose.
> >
> > TIA,
> >
> > Andrew Mawson
> > Bromley, Kent, UK