CAD CAM EDM DRO - Yahoo Group Archive

Re: Slightly o/t - Booting to DOS: Many thanks !!

on 2003-02-19 01:14:38 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Andrew Mawson <andrew@m...>"
<andrew@m...> wrote:
> Sorry for the (slightly) off topic post, but I want to set up a PC
to
> run TurboCNC in DOS, that also has WIN98SE already loaded.
>
> How can I get it to give a menu at boot, that defaults to DOS after
a
> timeout, but allows me to select WIN98 if I choose.
>
> TIA,
>
> Andrew Mawson
> Bromley, Kent, UK


Thanks to the helpful suggestions posted here I now have a workable
solution (editing the gui line in MSDOS.SYS)

Many thanks to all who responded

Andrew Mawson

Discussion Thread

Andrew Mawson <andrew@m... 2003-02-18 13:59:01 UTC Slightly o/t - Booting to DOS turbulatordude <davemucha@j... 2003-02-18 14:07:58 UTC Re: Slightly o/t - Booting to DOS Jeff Goldberg 2003-02-18 14:57:16 UTC RE: [CAD_CAM_EDM_DRO] Slightly o/t - Booting to DOS sparkazoid2001 <mark@c... 2003-02-18 15:21:55 UTC Re: Slightly o/t - Booting to DOS Randy Gordon-Gilmore 2003-02-18 15:23:29 UTC Re: Slightly o/t - Booting to DOS mart_wid <vwa1244302@a... 2003-02-18 16:19:52 UTC Re: Slightly o/t - Booting to DOS Zoran A. Scepanovic 2003-02-18 22:35:46 UTC Re: [CAD_CAM_EDM_DRO] Slightly o/t - Booting to DOS Andrew Mawson <andrew@m... 2003-02-19 01:14:38 UTC Re: Slightly o/t - Booting to DOS: Many thanks !! Hoyt McKagen 2003-02-19 03:18:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Slightly o/t - Booting to DOS Hoyt McKagen 2003-02-19 05:25:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Slightly o/t - Booting to DOS Carol & Jerry Jankura 2003-02-19 06:25:01 UTC RE: [CAD_CAM_EDM_DRO] Re: Slightly o/t - Booting to DOS