Cannot Jog w/Turbo CNC

I'm about finished with the building of my first CNC router. I've been
playing with Turbo CNC but can't get it to jog my motors. If I move to
MACH1 program I am able to jog and run the code. I've checked over the
setting for each axis in turbo CNC but there must be a setting I'm missing.
I'm using gecko 201's with a AXXUS controller. I used the formula editor in
Turbo CNC to set the steps/in and have even raised that number to see if it
had any affect. The are holding but do not move. Any suggestions would be
appreciated. Pictures and drawings are coming soon.

Thanks,

Barclay


[Non-text portions of this message have been removed]