RE: [CAD_CAM_EDM_DRO] Cannot Jog w/Turbo CNC
Posted by
Tim Goldstein
on 2003-03-02 18:09:53 UTC
Have you verified that you have the proper pin assignments in TurboCNC
to match those you are using in Mach1?
Tim
[Denver, CO]
Sherline products at Deep Discount
Mach1 & DeskCNC with credit card ordering
www.KTMarketing.com/Sherline
Now selling Visual Mill
to match those you are using in Mach1?
Tim
[Denver, CO]
Sherline products at Deep Discount
Mach1 & DeskCNC with credit card ordering
www.KTMarketing.com/Sherline
Now selling Visual Mill
> -----Original Message-----
>
>
> I'm about finished with the building of my first CNC router.
> I've been playing with Turbo CNC but can't get it to jog my
> motors. If I move to MACH1 program I am able to jog and run
> the code. I've checked over the setting for each axis in
> turbo CNC but there must be a setting I'm missing. I'm using
> gecko 201's with a AXXUS controller. I used the formula
> editor in Turbo CNC to set the steps/in and have even raised
> that number to see if it had any affect. The are holding but
> do not move. Any suggestions would be appreciated. Pictures
> and drawings are coming soon.
>
> Thanks,
>
> Barclay
>
> FAQ: http://www.ktmarketing.com/faq.html
Discussion Thread
Fusion X Studio
2003-03-02 17:52:05 UTC
Cannot Jog w/Turbo CNC
Tim Goldstein
2003-03-02 18:09:53 UTC
RE: [CAD_CAM_EDM_DRO] Cannot Jog w/Turbo CNC
barclaygeo <fusionxstudio@h...
2003-03-02 18:26:04 UTC
Re: Cannot Jog w/Turbo CNC
barclaygeo <fusionxstudio@h...
2003-03-02 18:45:55 UTC
Re: Cannot Jog w/Turbo CNC
turbulatordude <davemucha@j...
2003-03-03 06:38:43 UTC
Re: Cannot Jog w/Turbo CNC
Fusion X Studio
2003-03-03 09:08:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cannot Jog w/Turbo CNC