Re: Cannot Jog w/Turbo CNC

Figured it out... enough playing around and got the right setting.
Working now. Thanks!

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "barclaygeo
<fusionxstudio@h...>" <fusionxstudio@h...> wrote:

> Yes sir, I think they are all the same. The only thing I'm not

sure

> of is "low active" Settings? What is low active and dir pin state
> and step pin state?
>
> Thanks...
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Tim Goldstein" <timg@k...>
> wrote:
> > Have you verified that you have the proper pin assignments in
> TurboCNC
> > to match those you are using in Mach1?
> >
> > Tim
> > [Denver, CO]
> > Sherline products at Deep Discount
> > Mach1 & DeskCNC with credit card ordering
> > www.KTMarketing.com/Sherline
> > Now selling Visual Mill
> >
> >
> > > -----Original Message-----
> > >
> > >
> > > I'm about finished with the building of my first CNC router.
> > > I've been playing with Turbo CNC but can't get it to jog my
> > > motors. If I move to MACH1 program I am able to jog and run
> > > the code. I've checked over the setting for each axis in
> > > turbo CNC but there must be a setting I'm missing. I'm using
> > > gecko 201's with a AXXUS controller. I used the formula
> > > editor in Turbo CNC to set the steps/in and have even raised
> > > that number to see if it had any affect. The are holding but
> > > do not move. Any suggestions would be appreciated. Pictures
> > > and drawings are coming soon.
> > >
> > > Thanks,
> > >
> > > Barclay
> > >
> > > FAQ: http://www.ktmarketing.com/faq.html