Re: Re: Re: Shoptask Z-axis - quadralift?
Posted by
alan@s...
on 2003-03-06 09:26:27 UTC
On 6 Mar, CAD_CAM_EDM_DRO@yahoogroups.com wrote:
ever seen, is simply teeth cut into the quill. There's nothing to slit.
The "common" Shoptask solution for people who want very repeatable Z
axis positioning, is an external ball screw drive, with a stepper or
servo driving the screw.
Alan
--
Alan Rothenbush | The Spartans do not ask the number of the
Academic Computing Services | enemy, only where they are.
Simon Fraser University |
Burnaby, B.C., Canada | Agix of Sparta
> From: ccq@...The "rack" on the Shoptask, and every other mill/drill that I've
> Hi guys;
>
> Maybe someones tried this before, and can tell us if it'd work. It might
> require a wider than usual gear/rack, but what if you took a slitting saw, and
> slit the rack right down the middle.
ever seen, is simply teeth cut into the quill. There's nothing to slit.
The "common" Shoptask solution for people who want very repeatable Z
axis positioning, is an external ball screw drive, with a stepper or
servo driving the screw.
Alan
--
Alan Rothenbush | The Spartans do not ask the number of the
Academic Computing Services | enemy, only where they are.
Simon Fraser University |
Burnaby, B.C., Canada | Agix of Sparta
Discussion Thread
alan@s...
2003-03-05 16:18:07 UTC
Re: Shoptask Z-axis - quadralift?
ccq@x...
2003-03-05 18:52:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Shoptask Z-axis - quadralift?
ballendo
2003-03-06 00:24:40 UTC
removing backlash from rack/pinion drives wasRe: Shoptask Z-axis - quadralift?
Tony Jeffree
2003-03-06 00:42:56 UTC
Re: [CAD_CAM_EDM_DRO] removing backlash from rack/pinion drives wasRe: Shoptask Z-axis - quadralift?
jmkasunich
2003-03-06 06:46:46 UTC
removing backlash from rack/pinion drives wasRe: Shoptask Z-axis - quadralift?
ccq@x...
2003-03-06 07:48:49 UTC
Re: [CAD_CAM_EDM_DRO] removing backlash from rack/pinion drives wasRe: Shoptask Z-axis - quadralift?
alan@s...
2003-03-06 09:26:27 UTC
Re: Re: Re: Shoptask Z-axis - quadralift?
paul_norton2001
2003-03-07 02:16:53 UTC
removing backlash from rack/pinion drives wasRe: Shoptask Z-axis - quadralift?
ccq@x...
2003-03-07 04:52:56 UTC
Re: [CAD_CAM_EDM_DRO] removing backlash from rack/pinion drives wasRe: Shoptask Z-axis - quadralift?