Re: [CAD_CAM_EDM_DRO]Screw drive
Posted by
alex
on 2003-03-27 08:25:22 UTC
Folks!
Yesterday I stumbled upon "Model Engineer's Workshop" magazine.
Besides other interesting staff there was an article on making your own
screw drive as a replacement for a ball screw.
I'm amazed at how easy and inexpensive is to make this kind of drive -
basically its an arrangment of three short screws, belonging to a nut,
around the drive screw. One short screw can be tightened to adjust
the backlash.
It looks like anyone can make this kind of drive in a matter of hours.
Cheap too.
Alex
Yesterday I stumbled upon "Model Engineer's Workshop" magazine.
Besides other interesting staff there was an article on making your own
screw drive as a replacement for a ball screw.
I'm amazed at how easy and inexpensive is to make this kind of drive -
basically its an arrangment of three short screws, belonging to a nut,
around the drive screw. One short screw can be tightened to adjust
the backlash.
It looks like anyone can make this kind of drive in a matter of hours.
Cheap too.
Alex
Discussion Thread
alex
2003-03-27 08:25:22 UTC
Re: [CAD_CAM_EDM_DRO]Screw drive
Tony Jeffree
2003-03-27 08:34:04 UTC
Re: [CAD_CAM_EDM_DRO]Screw drive
alex
2003-03-27 14:53:36 UTC
Re: [CAD_CAM_EDM_DRO]Screw drive
Tony Jeffree
2003-03-27 15:27:13 UTC
Re: [CAD_CAM_EDM_DRO]Screw drive
alex
2003-03-27 15:38:36 UTC
Re: [CAD_CAM_EDM_DRO]Screw drive
Tony Jeffree
2003-03-27 15:55:18 UTC
Re: [CAD_CAM_EDM_DRO]Screw drive
Jason Cox
2003-03-27 16:02:44 UTC
Re: [CAD_CAM_EDM_DRO]Screw drive
alex
2003-03-27 16:19:47 UTC
Re: [CAD_CAM_EDM_DRO]Screw drive
JanRwl@A...
2003-03-27 18:45:14 UTC
Re: [CAD_CAM_EDM_DRO]Screw drive
Dantrol
2003-03-28 09:11:43 UTC
Re: Screw drive
alex
2003-03-28 09:35:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Screw drive
alex
2003-03-28 12:42:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Screw drive
vrsculptor
2003-03-28 14:35:15 UTC
Re: Screw drive
Torsten Kammerer
2003-03-28 14:42:41 UTC
Re: Screw drive
Miroslav Pejic
2003-03-29 04:40:18 UTC
RE: [CAD_CAM_EDM_DRO] Re: Screw drive
turbulatordude
2003-03-29 07:51:59 UTC
Re: [CAD_CAM_EDM_DRO]Screw drive
alex
2003-03-29 09:34:29 UTC
Re: [CAD_CAM_EDM_DRO]Screw drive
Tony Jeffree
2003-03-29 09:44:25 UTC
Re: [CAD_CAM_EDM_DRO]Screw drive
alex
2003-03-29 09:54:20 UTC
Re: [CAD_CAM_EDM_DRO]Screw drive
alex
2003-03-29 13:48:54 UTC
Re: [CAD_CAM_EDM_DRO]Screw drive