Re: [CAD_CAM_EDM_DRO]Screw drive

Tony,
thank you for clarification.
I wish somebody who has some kind of a machinery would try to make one -
it appears to be a fairly easy project.
Regards, Alex

----- Original Message -----
From: Tony Jeffree <tony@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, March 29, 2003 12:48 PM
Subject: Re: [CAD_CAM_EDM_DRO]Screw drive


> At 15:51 29/03/2003 +0000, you wrote:
> >I too am perplexed at what the thing looks like, but I guess that the
> >three screws are set so the heads act like threads in the larger
> >leadscrew.
> >
> >Since I didn't see any reference to bearings, the unit would wear
> >quickly.
> >
> >Dave
>
> Dave -
>
> Its hard to visualize without a diagram or pic, so take a look at this:
>
>
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/Tony%27s%20files/screw%2
0drive.JPG
>
> There are three short lengths of threaded rod (they don't have heads!)
> arranged in a triangle around the leadscrew. Each of the short rods run in
> needle roller bearings & have thrust bearings at each end (as Alex has
> indicated, the latter could possibly be plain bushings, although the
> article talks of using cheap plastic caged ball races). The top screw is
> adjustable to take out any slack between the leadscrew & the "screw nut".
>
>
> Regards,
> Tony
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>