Re: [CAD_CAM_EDM_DRO] Re: Sherline Tool Changer - Sneak Peek

Peter,
It's in the files section, listed as "Sherline Tool Changer". It
takes a little time to download the video clip, depending on your net
connection. I just watched it, and it's pretty cool.

Marv Frankel
Los Angeles

----- Original Message -----
From: "Peter Cruickshank" <crankshaft_sg@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, March 31, 2003 3:00 AM
Subject: [CAD_CAM_EDM_DRO] Re: Sherline Tool Changer - Sneak Peek


> Hi;
>
> I just searched the files and photos and could not find the movie.
>
> Which directory and what's the file name ?
>
> Thanx
>
> PeterC
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "onecooltoolfool"
> <joevicar3@i...> wrote:
> > I have uploaded a movie of a six position automatic toolchanger
> that
> > I have developed to fit on a Sherline Vertical Mill. It is
> entirely
> > self contained and requires no modification to the mill except the
> > addition of a spacer block between the headstock and the Z column.
> >
> > It operates entirely from one double acting air cylinder. The
> tool
> > change takes approximately 1 second. It will work with CNC or
> manual
> > machines.
> >
> > The toolchanger will be entered in the 2003 Sherline Machinist's
> > Challenge and can be seen at NAMES at the end of April.
> >
> > Kits, plans, and parts will be available this summer.
> >
> > Thanks
> > Joe V.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>