Re: SPC cables
Posted by
Lee Studley
on 2003-03-31 13:31:05 UTC
I carefully soldered .1" center IC machined socket pins. The center
2 pins almost line up and the 2 outer pins are bent slightly inward.
I then soldered cable to another set of pins to make a mating plug.
Pulling out of the cable is an issue.
I Think digikey may have tiny locking headers near the correct
spacing?
Please let me know what you find also.
-Lee
I too would like to know a cheap source of these cables.
2 pins almost line up and the 2 outer pins are bent slightly inward.
I then soldered cable to another set of pins to make a mating plug.
Pulling out of the cable is an issue.
I Think digikey may have tiny locking headers near the correct
spacing?
Please let me know what you find also.
-Lee
I too would like to know a cheap source of these cables.
>
> So, if anyone does have a line on the raw connectors, do speak up.
> Alan
Discussion Thread
Alan Rothenbush
2003-03-31 13:10:51 UTC
Re: SPC cables
Lee Studley
2003-03-31 13:31:05 UTC
Re: SPC cables
Chris Baugher
2003-03-31 22:01:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: SPC cables
Alan Rothenbush
2003-04-02 12:49:09 UTC
Re: Re: SPC cables
Chris Baugher
2003-04-02 14:07:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: SPC cables