Re: [CAD_CAM_EDM_DRO] G201 death/repair/questions/problems (long post)
Posted by
Steven Ciciora
on 2003-04-01 12:12:10 UTC
I thought someone told me that the Geckos that were sold without lids
initially had the heat sink/base plate 'soft' anodized, not 'hard'
anodized. Small scratches in the heat sink/base plate would cause the case
of the FETS to conduct/short out to the base plate. This is a bad thing.
If it were me, I'd scratch off some of the black coating on the sides, make
sure I'm getting good contact to the aluminum with my multi meter, and then
check for a short between the case and each of the 8 FETS. Actually, it
were me, I'd put some mica insulation between each fet and the case, so I
know that they are not shorting to the case.
Please let us know how it goes, and what is wrong/isn't wrong with your
geckos. I love a good mistry.
- Steven Ciciora
At 11:53 AM 4/1/03 -0800, you wrote:
initially had the heat sink/base plate 'soft' anodized, not 'hard'
anodized. Small scratches in the heat sink/base plate would cause the case
of the FETS to conduct/short out to the base plate. This is a bad thing.
If it were me, I'd scratch off some of the black coating on the sides, make
sure I'm getting good contact to the aluminum with my multi meter, and then
check for a short between the case and each of the 8 FETS. Actually, it
were me, I'd put some mica insulation between each fet and the case, so I
know that they are not shorting to the case.
Please let us know how it goes, and what is wrong/isn't wrong with your
geckos. I love a good mistry.
- Steven Ciciora
At 11:53 AM 4/1/03 -0800, you wrote:
>Hi folks,<snip>
>
>Chris Brick here (aka resosys).
>
>I've got to be doing something wrong. Really wrong. I'm hoping someone
>here can help out as I've exhausted my knowledge of these systems and
>I'm still having major issues. This is probably going to get pretty
>long so I'll apologize now.
>
Discussion Thread
Chris Brick
2003-04-01 11:53:33 UTC
G201 death/repair/questions/problems (long post)
Steven Ciciora
2003-04-01 12:12:10 UTC
Re: [CAD_CAM_EDM_DRO] G201 death/repair/questions/problems (long post)
caudlet
2003-04-01 16:10:33 UTC
Re: G201 death/repair/questions/problems (long post)(long answer)
Mariss Freimanis
2003-04-01 18:41:28 UTC
Re: G201 death/repair/questions/problems (long post)
Jon Elson
2003-04-01 22:31:55 UTC
Re: [CAD_CAM_EDM_DRO] G201 death/repair/questions/problems (long post)
turbulatordude
2003-04-02 08:12:20 UTC
Re: G201 death/repair/questions/problems (long post)
Steven Ciciora
2003-04-02 08:33:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: G201 death/repair/questions/problems (long post)
Mariss Freimanis
2003-04-02 08:58:59 UTC
Re: G201 death/repair/questions/problems (long post)
Chris Brick
2003-04-02 09:13:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: G201 death/repair/questions/problems (long post)
Tony Jeffree
2003-04-02 10:29:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: G201 death/repair/questions/problems (long post)
Mariss Freimanis
2003-04-02 10:45:39 UTC
Re: G201 death/repair/questions/problems (long post)
Chris Brick
2003-04-02 11:07:19 UTC
Re: [CAD_CAM_EDM_DRO] G201 death/repair/questions/problems (long post)
Andrew Mawson
2003-04-02 13:59:33 UTC
Re: G201 death/repair/questions/problems (long post)
Tony Jeffree
2003-04-02 14:03:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: G201 death/repair/questions/problems (long post)
Chris Brick
2003-04-02 15:18:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: G201 death/repair/questions/problems (long post)
Mariss Freimanis
2003-04-02 16:39:08 UTC
Re: G201 death/repair/questions/problems (long post)
Chris Brick
2003-04-02 16:55:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: G201 death/repair/questions/problems (long post)
jmkasunich
2003-04-03 11:46:45 UTC
Re: G201 death/repair/questions/problems (long post)
Mariss Freimanis
2003-04-03 14:01:31 UTC
Re: G201 death/repair/questions/problems (long post)
jmkasunich
2003-04-03 20:26:13 UTC
Re: G201 death/repair/questions/problems (long post)
Lloyd Leung
2003-04-21 08:38:39 UTC
Re: MY 210 GECKO BURNED!!!!!!