Re: G201 death/repair/questions/problems (long post)
Posted by
jmkasunich
on 2003-04-03 20:26:13 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Mariss Freimanis"
<mariss92705@y...> wrote:
looking for. I'll probably order my G201s shortly after
the NAMEs show is over (early May).
John Kasunich
<mariss92705@y...> wrote:
> John,Especially a bullet-proof one!
>
> A motor drive design is more difficult and time consuming
> than designing something like the G2002.
> Because there is no project team where the efforts of manyBut you told me what the situation is. That's all I was
> people have to be coordinated, there are no scheduled
> mileposts that have to be met. Complicating things further,
> I do not work on design in a linear fashion. When I get
> stale or run up against an obstacle on one project, I work
> on a different one. This change of perspective yeilds
> the needed renewal or idea for the fallow project.
>
> I am actively working on the G201IP, the BLDC servodrive
> and the "classic" servoamp. In two weeks I get the G2002
> boards and sheetmetal which I will have to proof-out and
> write a manual for.
>
> In short, I can't tell you when it will be done because I
> don't know when either.
looking for. I'll probably order my G201s shortly after
the NAMEs show is over (early May).
John Kasunich
Discussion Thread
Chris Brick
2003-04-01 11:53:33 UTC
G201 death/repair/questions/problems (long post)
Steven Ciciora
2003-04-01 12:12:10 UTC
Re: [CAD_CAM_EDM_DRO] G201 death/repair/questions/problems (long post)
caudlet
2003-04-01 16:10:33 UTC
Re: G201 death/repair/questions/problems (long post)(long answer)
Mariss Freimanis
2003-04-01 18:41:28 UTC
Re: G201 death/repair/questions/problems (long post)
Jon Elson
2003-04-01 22:31:55 UTC
Re: [CAD_CAM_EDM_DRO] G201 death/repair/questions/problems (long post)
turbulatordude
2003-04-02 08:12:20 UTC
Re: G201 death/repair/questions/problems (long post)
Steven Ciciora
2003-04-02 08:33:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: G201 death/repair/questions/problems (long post)
Mariss Freimanis
2003-04-02 08:58:59 UTC
Re: G201 death/repair/questions/problems (long post)
Chris Brick
2003-04-02 09:13:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: G201 death/repair/questions/problems (long post)
Tony Jeffree
2003-04-02 10:29:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: G201 death/repair/questions/problems (long post)
Mariss Freimanis
2003-04-02 10:45:39 UTC
Re: G201 death/repair/questions/problems (long post)
Chris Brick
2003-04-02 11:07:19 UTC
Re: [CAD_CAM_EDM_DRO] G201 death/repair/questions/problems (long post)
Andrew Mawson
2003-04-02 13:59:33 UTC
Re: G201 death/repair/questions/problems (long post)
Tony Jeffree
2003-04-02 14:03:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: G201 death/repair/questions/problems (long post)
Chris Brick
2003-04-02 15:18:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: G201 death/repair/questions/problems (long post)
Mariss Freimanis
2003-04-02 16:39:08 UTC
Re: G201 death/repair/questions/problems (long post)
Chris Brick
2003-04-02 16:55:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: G201 death/repair/questions/problems (long post)
jmkasunich
2003-04-03 11:46:45 UTC
Re: G201 death/repair/questions/problems (long post)
Mariss Freimanis
2003-04-03 14:01:31 UTC
Re: G201 death/repair/questions/problems (long post)
jmkasunich
2003-04-03 20:26:13 UTC
Re: G201 death/repair/questions/problems (long post)
Lloyd Leung
2003-04-21 08:38:39 UTC
Re: MY 210 GECKO BURNED!!!!!!