CAD CAM EDM DRO - Yahoo Group Archive

Re: Dirty Little Secrets (response) - solved

Posted by deanc500
on 2003-04-30 06:23:05 UTC
This is not an issue for me any more. My noise problems are gone. I
used a .1uF cap between err/res and enc-, and I added 100ohm resisters
in series with the err/res lines before I tied them together (as per
manufacturers suggestion). Problem solved. My mill is now up to 100ipm
and runs great. I have a 20mb avi movie for those with faster modems here
http://www.axxustech.com/movies/millvideo.AVI

Can we please put this to rest and end this inappropriate thread.
Dean

Discussion Thread

Jon Elson 2003-04-29 22:03:26 UTC Re: [CAD_CAM_EDM_DRO] Dirty Little Secrets caudlet 2003-04-30 05:55:01 UTC Re: Dirty Little Secrets (response) deanc500 2003-04-30 06:23:05 UTC Re: Dirty Little Secrets (response) - solved deanc500 2003-04-30 06:45:40 UTC Re: Dirty Little Secrets (response) - solved turbulatordude 2003-04-30 07:03:36 UTC Re: Dirty Little Secrets (response) - solved Gecko 340 and noise Lee Studley 2003-04-30 09:25:38 UTC Re: Dirty Little Secrets (response) - solved Gecko 340 and noise