CAD CAM EDM DRO - Yahoo Group Archive

Re: Guides

Posted by forumtvm
on 2003-05-14 16:58:29 UTC
Harvey White <madyn@i...> wrote:

> >You can buy sealed roller bearings from MSC Industrial for $2 or
so each. They make great roller guides. MSC also sells cold rolled
flat stock which would work great for the rails.
>
> You can get ABEC 3, 5 or 7 bearings for about 13 dollars up to 20
> dollars or so. These will fit on an 8 mm shaft and are roughly 22mm
> in diameter. Your local mega-sports store will sell them as roller
> blade bearing replacements in tubes of 8.

Sorry if this is a dumb questions, but are these bearings, eg.

http://www.speed-bearing.com/shop/shop.asp
1 tin box with 16 pieces Speed bearings 608-ZRS ABEC7, 1 Speed cream
and using instructions

for sliding along a guide shaft or holding a rotating shaft.

Reason I am asking is I am looking for bearings (or are they refered
to as bushing instead) for sliding on a shaft that are easy to
purchase, eg, in a sports shop in a shopping complex.

Thanks.

Discussion Thread

alex 2003-05-12 17:00:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides indy123456 2003-05-12 20:08:28 UTC Re: Guides dcdziner 2003-05-12 20:30:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides John Craddock 2003-05-13 01:31:08 UTC RE: [CAD_CAM_EDM_DRO] Re: Guides alex 2003-05-13 07:41:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides Harvey White 2003-05-13 08:29:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides JanRwl@A... 2003-05-13 13:31:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides alex 2003-05-13 13:42:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides JanRwl@A... 2003-05-13 14:50:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides alex 2003-05-13 15:02:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides turbulatordude 2003-05-13 15:57:04 UTC Re: Guides alex 2003-05-13 16:04:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides Ross 2003-05-13 17:06:43 UTC Re: Guides turbulatordude 2003-05-13 17:11:56 UTC types of timing belts ( was Re: Guides alex 2003-05-13 19:19:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides JanRwl@A... 2003-05-13 20:40:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides alex 2003-05-14 06:50:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides David A. Frantz 2003-05-14 07:20:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides alex 2003-05-14 07:38:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides wayne_j_hill 2003-05-14 08:02:30 UTC types of timing belts ( was Re: Guides turbulatordude 2003-05-14 09:57:47 UTC Re: Guides turbulatordude 2003-05-14 09:58:23 UTC types of timing belts ( was Re: Guides Ross 2003-05-14 10:02:22 UTC Re: Guides alex 2003-05-14 10:31:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides Harvey White 2003-05-14 12:53:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides forumtvm 2003-05-14 16:58:29 UTC Re: Guides Harvey White 2003-05-14 19:39:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides Don Rogers 2003-05-14 19:43:01 UTC Re:Guides turbulatordude 2003-05-15 05:56:24 UTC Re:Guides Ross 2003-05-15 06:12:09 UTC Re:Guides alex 2003-05-15 14:40:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Guides