Re: [CAD_CAM_EDM_DRO] RE: DRO ENCODER TOOL

Hi Mike,

The place to buy linear strip and encoders is usdigital.com they also do rotary encoders which are necessary should you wish to go over 360 in quarture.

Regards,

Terry.

----- Original Message -----
From: Mike Gann
To: CAD_CAM_EDM_DRO@onelist.com
Sent: Thursday, March 09, 2000 7:04 PM
Subject: Re: [CAD_CAM_EDM_DRO] RE: DRO ENCODER TOOL


From: Mike Gann <mikegann@...>

Tom -

What was the resolution of your linear encoders and where
did you buy them?

thanks

Mike


"SMITH, THOMAS B. (JSC-DX)" wrote:
>
> From: "SMITH, THOMAS B. (JSC-DX)" <tbsmith@...>
>
> Terry,
>
> The pictures are very useful, thanks! And don't think you are beating this
> to death. All this discussion has saved me (and others, I'm sure) a fair
> amount of cash. I just finished installing DRO on my mill using linear
> encoders for $150.00. Now with the tips from you, Art
> and others, I can do the same for my lathe for a tenth that cost.
>
> One more question...did you remove the retaining clip before using your
> tool?
>
> Tom
>
> >>>>>>>>>>>>
> Message: 10
> Date: Thu, 09 Mar 2000 00:26:49 -0000
> From: "Terry May" <tmay@...>
> Subject: DRO ENCODER TOOL
>
> At the risk of beating this subject to death, I made the wedge tools
> I discussed earlier to remove the encoder disc from the Goldmine
> electronics servo motors. The tool worked very well removing the
> encoder and not damaging the disc.
>
> I put a couple of pictures of the wedges and the usage into the RCM
> dropbox today (DRO_Tool.jpg, etc.) since I don't have my own web
> site. Hope they are useful to someone.
> Terry May
> <<<<<<<<<<<<<<
>
> ------------------------------------------------------------------------
> GET A NEXTCARD VISA, in 30 seconds! Get rates as low as 2.9%
> Intro or 9.9% Fixed APR and no hidden fees. Apply NOW!
> http://click.egroups.com/1/936/1/_/423600/_/952623637/
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager

------------------------------------------------------------------------------



------------------------------------------------------------------------------
Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager



[Non-text portions of this message have been removed]