Re: [CAD_CAM_EDM_DRO] Hardinge HNC resolver - encoder signal conversion
Posted by
Matt Shaver
on 2003-05-17 15:41:02 UTC
I'm about to do the same thing to an HNC, but I've decided to replace the
resolvers with encoders, rather than convert the resolver signal to
quadrature. The reason is cost, converter boards cost ~$300/axis...
Matt
resolvers with encoders, rather than convert the resolver signal to
quadrature. The reason is cost, converter boards cost ~$300/axis...
Matt
On Saturday 17 May 2003 15:10, machinist24540 wrote:
> Hello, All.
> I have been wanting to upgrade my Hardinge HNC chucker for some time
> now. The problem I have run in to is the resolvers. No one seem to
> have a kit for to accept feedback from them and centroids kit is
> $17K. Far more than is feasible for me. I spoke with a gentelman
> yesterday and he said that you could buy a converter that would
> convert the resolver signal to quadrature encoder signal. Then I
> could run a servo driver as the lathe has servo motors.
> Has any one ever tried this? Any input is welcome.
> Thanks in advance,
> John
Discussion Thread
machinist24540
2003-05-17 12:10:47 UTC
Hardinge HNC resolver - encoder signal conversion
Matt Shaver
2003-05-17 15:41:02 UTC
Re: [CAD_CAM_EDM_DRO] Hardinge HNC resolver - encoder signal conversion
machinist24540
2003-05-17 20:10:30 UTC
Re: Hardinge HNC resolver - encoder signal conversion
machinist24540
2003-05-17 20:10:40 UTC
Re: Hardinge HNC resolver - encoder signal conversion
David A. Frantz
2003-05-18 08:21:23 UTC
Re: [CAD_CAM_EDM_DRO] Hardinge HNC resolver - encoder signal conversion
machinist24540
2003-08-03 18:07:54 UTC
Re: Hardinge HNC resolver - encoder signal conversion
Matt Shaver
2003-08-04 00:48:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hardinge HNC resolver - encoder signal conversion
machinist24540
2003-08-04 16:09:14 UTC
Re: Hardinge HNC resolver - encoder signal conversion
Matt Shaver
2003-08-07 21:38:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Hardinge HNC resolver - encoder signal conversion
machinist24540
2003-08-08 09:15:18 UTC
Re: Hardinge HNC resolver - encoder signal conversion
machinist24540
2003-08-08 09:23:25 UTC
Re: Hardinge HNC resolver - encoder signal conversion