Re: [CAD_CAM_EDM_DRO] phase converter

I think he want's to hook up a rotary phase convertor, not
a static convertor ( capacitor type). Al, though a properly
tuned rotary convertor use's capacitors.

Steve


----------
From: Lngknife29@...
To: CAD_CAM_EDM_DRO@onelist.com
Subject: Re: [CAD_CAM_EDM_DRO] phase converter
Date: Thursday, March 09, 2000 4:40 PM

From: Lngknife29@...

first you have to have a capacitor phase convertor---you hook it up and use

the motor windings to smooth out the generated phase-----thats the way ive
done it--good luck--if you find another way please let me know---mem

------------------------------------------------------------------------
DON'T HATE YOUR RATE!
Get a NextCard Visa, in 30 seconds! Get rates as low as
0.0% Intro or 9.9% Fixed APR and no hidden fees.
Apply NOW!
http://click.egroups.com/1/2120/1/_/423600/_/952648817/
------------------------------------------------------------------------

Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager