CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] phase converter

Posted by Jon Anderson
on 2000-03-10 06:25:16 UTC
"David M. Munro" wrote:

> I bought the Roto-phase. Damn it's noisy.


I had one once, a 5hp model. It drove me up the wall with all the racket
it made. Bolt it to a couple steel bars to widen the footprint,
and put some good large rubber padded feet on the ends. If you bolt it
to a board, the board just acts like a speaker.
Enclose it in a box with some sound absorbing foam, egg crate flats,
etc. A small fan and inlet will keep it cool.
If you are ambitious, take the capacitor box off the motor and hang it
on the wall. I just made my own to replace it.

Jon

Discussion Thread

R. Dean 2000-03-09 13:46:56 UTC Re: [CAD_CAM_EDM_DRO] phase converter Drew Rogge 2000-03-09 14:18:29 UTC Re: [CAD_CAM_EDM_DRO] phase converter paul@a... 2000-03-09 14:28:08 UTC Re: [CAD_CAM_EDM_DRO] phase converter Lngknife29@a... 2000-03-09 16:41:22 UTC Re: [CAD_CAM_EDM_DRO] phase converter Steve Carlisle 2000-03-09 17:35:33 UTC Re: [CAD_CAM_EDM_DRO] phase converter JanRwl@A... 2000-03-09 17:52:24 UTC Re: [CAD_CAM_EDM_DRO] phase converter JanRwl@A... 2000-03-09 17:57:28 UTC Re: [CAD_CAM_EDM_DRO] phase converter Tim Goldstein 2000-03-09 20:30:34 UTC RE: [CAD_CAM_EDM_DRO] phase converter R. Dean 2000-03-09 21:39:56 UTC Re: [CAD_CAM_EDM_DRO] phase converter David M. Munro 2000-03-10 05:56:30 UTC Re: [CAD_CAM_EDM_DRO] phase converter Jon Anderson 2000-03-10 06:25:16 UTC Re: [CAD_CAM_EDM_DRO] phase converter Charles VanLeeuwen 2000-03-10 07:44:38 UTC Re: [CAD_CAM_EDM_DRO] phase converter Carlos Guillermo 2000-03-10 08:13:13 UTC VFD / phase converter D.F.S. 2000-03-10 08:45:48 UTC Re: [CAD_CAM_EDM_DRO] Rotary Phase converter design?