CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Sound proof box

Posted by Tim Goldstein
on 2003-06-02 08:04:50 UTC
Graham,

If you are having noise problems with the Proxxon, don't even think
about a larger mill. The Proxxon is the quietest mill I own (others are
Sherline, Shoptask, Bridgeport) by a considerable margin.

For keeping the noise from transmitting through the bench I have in the
past mounted the machine to a wood plate then set the plate on a
neoprene foam pad like they used to use under typewriters. The wood
plate give the machine some stability and the rubber foam pad cuts the
noise transmission.

Tim
[Denver, CO]
Sherline products at Deep Discount
Mach1 & DeskCNC with credit card ordering
www.KTMarketing.com/Sherline


> -----Original Message-----
>
> I have finally got my proxxon conversion fully up and running but and
> the only problem with it is the noise. My house ajoins another and
> there is no chance I can mill on an evening.
>
> I'd like to make a sound proof box for it and have already made a
> 2.5" thick polystyrene cover for it that now just requires a "double
> glazed" door. However after trying it last night with some foam
> jammed in as a door it was anything but sound proof. Sitting the
> mill on some foam did help a little but is not ideal.
>
> Has anyone built such an enclosure? Would it be worth lining it with
> egg box foam? Should it be clad with a hard material like MDF as
> well? Is there a way of making a decent base for the mill that will
> not turn my bench into a sound box?
>
> Help
>
> Graham
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html

Discussion Thread

Graham Stabler 2003-06-02 04:21:04 UTC Sound proof box CL 2003-06-02 06:08:31 UTC Re: [CAD_CAM_EDM_DRO] Sound proof box turbulatordude 2003-06-02 06:09:44 UTC Re: Sound proof box Tim Goldstein 2003-06-02 08:04:50 UTC RE: [CAD_CAM_EDM_DRO] Sound proof box Jon Elson 2003-06-02 09:36:48 UTC Re: [CAD_CAM_EDM_DRO] Sound proof box Graham Stabler 2003-06-02 09:55:34 UTC Re: Sound proof box Elliot Burke 2003-06-02 11:55:27 UTC re:Re: Sound proof box dcdziner 2003-06-02 12:48:58 UTC Re: [CAD_CAM_EDM_DRO] Sound proof box David A. Frantz 2003-06-02 17:30:53 UTC Re: [CAD_CAM_EDM_DRO] Sound proof box Jeff Demand 2003-06-02 20:23:25 UTC Re: Sound proof box Don Rogers 2003-06-05 23:10:02 UTC Re: Re: Sound proof box glee@i... 2003-06-19 21:35:12 UTC Low cost 3DCAD & Modelling (for students)