RE: [CAD_CAM_EDM_DRO] Re: Bobcad
Posted by
Carol & Jerry Jankura
on 2003-06-17 19:26:55 UTC
Hi, Tom:
That combo works for me. The only thing: you have to remember to draw the
toolpath using Vector's "offset" feature as TurboCNC does not support the
G4x series of codes.
-- Jerry
That combo works for me. The only thing: you have to remember to draw the
toolpath using Vector's "offset" feature as TurboCNC does not support the
G4x series of codes.
-- Jerry
> -----Original Message-----
> From: Tom Benedict [mailto:benedict@...]
> Sent: Tuesday, June 17, 2003 9:52 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Re: Bobcad
>
>
> How's TurboCNC with Vector output? Just curious.
>
> Tom
Discussion Thread
Ron K
2003-06-17 17:59:50 UTC
Bobcad
mmurray701
2003-06-17 18:34:55 UTC
Re: Bobcad
Tom Benedict
2003-06-17 18:50:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bobcad
Carol & Jerry Jankura
2003-06-17 19:26:55 UTC
RE: [CAD_CAM_EDM_DRO] Re: Bobcad
Fred Smith
2003-06-17 19:27:13 UTC
Re: Bobcad
Jon Elson
2003-06-17 22:28:36 UTC
Re: [CAD_CAM_EDM_DRO] Bobcad
Keith Rumley
2003-06-18 06:03:48 UTC
Re: [CAD_CAM_EDM_DRO] Bobcad
carl fair
2003-06-18 13:34:48 UTC
Re: [CAD_CAM_EDM_DRO] Bobcad
Dan Mauch
2005-03-26 07:45:07 UTC
Re: [CAD_CAM_EDM_DRO] Bobcad
Ron Kline
2005-03-26 08:16:27 UTC
Re: [CAD_CAM_EDM_DRO] Bobcad
Ron Kline
2005-03-26 08:34:51 UTC
Re: [CAD_CAM_EDM_DRO] Bobcad
Dan Mauch
2005-03-26 09:05:40 UTC
Re: [CAD_CAM_EDM_DRO] Bobcad
R Rogers
2005-03-26 12:09:55 UTC
Re: [CAD_CAM_EDM_DRO] Bobcad
R Rogers
2005-03-26 12:21:48 UTC
Re: [CAD_CAM_EDM_DRO] Bobcad
R Rogers
2005-03-26 12:25:15 UTC
Re: [CAD_CAM_EDM_DRO] Bobcad
Ron Kline
2005-03-26 13:02:16 UTC
Re: [CAD_CAM_EDM_DRO] Bobcad
R Rogers
2005-03-26 13:35:56 UTC
Re: [CAD_CAM_EDM_DRO] Bobcad
Shawncd
2005-03-26 19:56:00 UTC
Re: [CAD_CAM_EDM_DRO] Bobcad