CAD CAM EDM DRO - Yahoo Group Archive

Re: Blown Gecko 340 Update

Posted by andyolney
on 2003-06-27 22:04:43 UTC
I agree, have some worries about it, but as I built up hours with no
problems my confidence is increasing. Andy


--- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@p...> wrote:
>
>
> andyolney wrote:
>
> >Recap - I blew one of my Gecko G340 mosfets and was asking for
help
> >in finding out why.
> >
> >In the end I don't know the cause. Dan Mauch sent me a couple of
> >mosfets and I sucessfully replaced the bad one, hooked it up and
have
> >several hours on the repaired Gecko and a first part done.
> >
> >
> Glad you were able to fix it, but the question is whether it is
going
> to blow again? You've got it running, but the root cause has not
been
> found. That always leaves me feeling that I'm living on borrowed
time.
>
> Jon

Discussion Thread

andyolney 2003-06-15 21:16:06 UTC Blown Gecko 340 JanRwl@A... 2003-06-15 22:19:08 UTC Re: [CAD_CAM_EDM_DRO] Blown Gecko 340 Jon Elson 2003-06-15 22:28:23 UTC Re: [CAD_CAM_EDM_DRO] Blown Gecko 340 andyolney 2003-06-16 09:10:18 UTC Re: Blown Gecko 340 Jon Elson 2003-06-16 10:34:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Blown Gecko 340 andyolney 2003-06-16 21:19:55 UTC Re: Blown Gecko 340 andyolney 2003-06-17 22:53:03 UTC Re: Blown Gecko 340 Lee Studley 2003-06-18 10:17:32 UTC Re: Blown Gecko 340 Jon Elson 2003-06-18 10:50:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Blown Gecko 340 andyolney 2003-06-22 15:34:39 UTC Re: Blown Gecko 340 Update Jon Elson 2003-06-27 20:26:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Blown Gecko 340 Update andyolney 2003-06-27 22:04:43 UTC Re: Blown Gecko 340 Update Lee Studley 2003-06-27 23:35:05 UTC Re: Blown Gecko 340 Update Dan Mauch 2003-07-14 10:51:50 UTC Interesting problem Fred Smith 2003-07-14 15:18:27 UTC Re: Interesting problem stevenson_engineers 2003-07-14 17:31:43 UTC Re: Interesting problem