Re: [CAD_CAM_EDM_DRO] Re: err/res circuit(updated picture)

----- Original Message -----
From: "andyolney" <andy@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, July 21, 2003 11:09 AM
Subject: [CAD_CAM_EDM_DRO] Re: err/res circuit(updated picture)


> Jim - You might want to look at Alan Rothenberg's error reset
> controller here: http://www.sfu.ca/~alan/gecko/err.html
> It may do what you want without reinveting the wheel or give you
> ideas on how someone else approached the problem. Andy
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "James Cullins"
> <jcullins@c...> wrote:
> > I am designing one using a PIC to do the logic.
> > It will monitor 4 drives and use an led to blink 1 for the first 2
> for the
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>