Re: Gantry design

What do you plan on doing with it?


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "MDS1878" <mds1878@c...>
wrote:

> I have just about completed with my table build-out for a 13x26"
> router/engraver. Used 1/8 2x2 tubing, I mitered the corners and

tig

> welded the tubing. So the finish product is seamless, welds were
> ground smooth. The Gantry is next and I am after a fair amount of
> precision.
> Arms 15" on either side from table base. Should I add 2 stiffeners
> at a 45-degree angle to table. This should eliminate any twisting
> force for application.
> Comments or suggestions on design or measurement in gantry build-

out

> appreciated!!!
>
>
> Ken
> Kenneth A. Emmert