Re: [CAD_CAM_EDM_DRO] Re: Gantry design

When your done dont forget to put up some pictures in our files section or
email a link to them.
Heck, the pro's in here could help you out even better if you showed what
you have built so far...

Vince

> What do you plan on doing with it?
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "MDS1878" <mds1878@c...>
> wrote:
>> I have just about completed with my table build-out for a 13x26"
>> router/engraver. Used 1/8 2x2 tubing, I mitered the corners and
> tig
>> welded the tubing. So the finish product is seamless, welds were
>> ground smooth. The Gantry is next and I am after a fair amount of
>> precision.
>> Arms 15" on either side from table base. Should I add 2 stiffeners
>> at a 45-degree angle to table. This should eliminate any twisting
>> force for application.
>> Comments or suggestions on design or measurement in gantry build-
> out
>> appreciated!!!
>>
>>
>> Ken
>> Kenneth A. Emmert
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@... Moderator: pentam@... indigo_red@...
> [Moderators] URL to this group:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble. http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there,
> for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/