CAD CAM EDM DRO - Yahoo Group Archive

Maxnc control system

Posted by mmeyers1111
on 2003-07-30 17:57:53 UTC
Hi folks...

Maxnc sells a closed loop servo system with 3 210oz servos, power
supply, Maxnc control software, etc. It looks like everything
somebody would need to provide motion control for a 2ft X 4ft cnc
router that is similar to the one they sell (www.maxnc.com). The
control kit sells for around $1200.

1)Does anybody have experience with Maxnc control software that could
comment on pros/cons? The other options I've considered are Mach2 or
TurboCNC. Apparently, Maxnc will not de-bundle the software and they
only recommend their own software due to proprietary firmware they
add to the motion control system. In other words they
wouldn't/couldn't tell me if Mach2 or TurboCNC would work.

2) Given the price, is there some overriding reason that I should
consider a stepper system over the Maxnc servo system?

Mike

Discussion Thread

mmeyers1111 2003-07-30 17:57:53 UTC Maxnc control system Carlos Guillermo 2003-07-30 19:58:11 UTC RE: [CAD_CAM_EDM_DRO] Maxnc control system John Guenther 2003-07-30 20:10:39 UTC RE: [CAD_CAM_EDM_DRO] Maxnc control system jeffalanp 2003-07-30 20:42:59 UTC Re: Maxnc control system mmeyers1111 2003-07-31 13:31:31 UTC Re: Maxnc control system