Re: [CAD_CAM_EDM_DRO] Doesnt ANYONE have this drawn up??? was: John's CNC plans???

Hi Bill;

Are those .dxf files? I'm not sure QCad will work on them if not.
Thanks.

Bill

On Wed Aug 13 09:41:17 2003 Bill Kichman wrote:

>Yes, I have the Acad drawing if anybody wants it. It is Kim's nice design,
>used for a 3/4" screw.
>Just change some of your dimensions to suit, but it gives concept.
> Just email me directly and I will forward it.
>I also have it in 3 parts in pdf files.
>
>
>R. William Kichman, P.E.
>Kichman Engineering Associates
>103 Old Furnace Road
>Cornwall, PA 17016-0643
>tel/fax 717/270-0714
>----- Original Message -----
>From: "Kim Lux" <lux@...>
>To: <CAD_CAM_EDM_DRO@yahoogroups.com>
>Sent: Wednesday, August 13, 2003 12:25 PM
>Subject: Re: [CAD_CAM_EDM_DRO] Doesnt ANYONE have this drawn up??? was:
>John's CNC plans???
>
>
>> I passed some of my shop drawings on to Bill who has CAD'd a few of
>> them. The ball screw spindles we used would work for a 1.25" ballscrew
>> if the main diameter was increased.
>>
>> I'm sure Bill will share, right Bill ?
>>
>> Kim
>>
>>
>> On Wed, 2003-08-13 at 10:19, Vince Negrete wrote:
>> > I have to repeat this question since I know somebody has info but I'm
>> > guessin missed my post:
>> >
>> > If, anyone else has a good dimensional drawing for an End
>> > Bearing/Nut assy, that would work well with a 1.125" 5-tpi Ballscrew
>> > installed on a Bridgeport Style Knee-Mill I'd appreciate the info! The
>> > idea here is to adapt a proven Concept before I make a mistake
>incorrectly
>> > cutting the Ballscrews.... (a very expensive mistake)
>> >
>> > If I dont have the Terminology of the end-mount correct maybe this will
>help
>> > explain what I'm looking for:
>> > It mounts on the end of the Ballscrew affixing it to the Mill.
>> > Y-Axis should have One preloaded mountpoint typically with one bearing
>block
>> > assy., and X-Axis should have two bearing block assy's with one side
>> > preloaded. Maybe its my use of the word Preloaded that is confusing
>> > things.. My
>> > terminology might be messed up.
>> >
>> > The design would determine the cuts needed to modify my Ballscrew ends
>for
>> > refit onto the Mill.
>> >
>> > Thanks
>> > Vince
>> >
>> >
>> >
>> >
>> > ----- Original Message -----
>> > From: "Vince Negrete" <vnegrete@...>
>> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
>> > Sent: Tuesday, August 12, 2003 10:43 PM
>> > Subject: [CAD_CAM_EDM_DRO] John's CNC plans??? was: PC Based CNC Mill
>For
>> > Hobby
>> >
>> >
>> > > I've inquired about these plans and recieved ZERO answer back.
>> > > John must be very busy. I was interested primarily in the design and
>> > > dimensions of the preload assy and was willing to do a purchase BUT,
>No
>> > > answer back..
>> > > If you get a reply let me know. Maybe I burned my bridge with that
>guy in
>> > > the past... Cant remember. :)
>> > >
>> > > Heck, if anyone else has a good dimensional drawing for a Preload
>> > > Bearing/Nut assy, that would work well with a 1.125" 5-tpi Ballscrew
>> > > installed on a Bridgeport Style Knee-Mill I'd appreciate the info!
>The
>> > > idea here is to adapt a proven Concept before I make a mistake
>incorrectly
>> > > cutting the Ballscrews.... (a very expensive mistake)
>> > >
>> > > Vince
>> > >
>> > >
>> > > ----- Original Message -----
>> > > From: "Antonius J.M. Groothuizen" <agroot@...>
>> > > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
>> > > Sent: Tuesday, August 12, 2003 7:34 PM
>> > > Subject: [CAD_CAM_EDM_DRO] Re: PC Based CNC Mill For Hobby
>> > >
>> > >
>> > > > Artisan,
>> > > >
>> > > > If you want to build your own, do a net search for "Hobby CNC" and
>> > > > variations. There are several sites selling plans. John
>> > > > Kleinbauer's website is a good source of imformation. He only ships
>> > > > plans to US and Canadian addresses, but ther are links on his
>website
>> > > > for more information.
>> > > >
>> > > > Tony
>> > > >
>> > > >
>> > > >
>> > > > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "fanuc_cnc" <fanuc_cnc@y...>
>> > > > wrote:
>> > > > > Hi all Groupist
>> > > > >
>> > > > > I am Want to make PC Based low cost CNC Table Top Mill.
>> > > > > For that Any one who can hepl me how to get stepper motor
>> > > > controler ,
>> > > > > Which is best,which software i can use,
>> > > > > Mechanical side is easy to manufacture for me
>> > > > >
>> > > > > thanks
>> > > > > Artisan
>> > > >
>> > > >
>> > > >
>> > > > Addresses:
>> > > > FAQ: http://www.ktmarketing.com/faq.html
>> > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>> > > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>> > > >
>> > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>> > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>> > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
>wanliker@...,
>> > > timg@...
>> > > > Moderator: pentam@... indigo_red@... [Moderators]
>> > > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>> > > >
>> > > > OFF Topic POSTS: General Machining
>> > > > If you wish to post on unlimited OT subjects goto:
>> > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
>it
>> > if
>> > > you have trouble.
>> > > > http://www.metalworking.com/news_servers.html
>> > > >
>> > > > http://groups.yahoo.com/group/jobshophomeshop I consider this to
>be a
>> > > sister site to the CCED group, as many of the same members are there,
>for
>> > OT
>> > > subjects, that are not allowed on the CCED list.
>> > > >
>> > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>THEM.
>> > > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>> > > > bill
>> > > > List Mom
>> > > > List Owner
>> > > >
>> > > >
>> > > >
>> > > > Your use of Yahoo! Groups is subject to
>> > http://docs.yahoo.com/info/terms/
>> > > >
>> > > >
>> > > >
>> > > >
>> > >
>> > >
>> > > Addresses:
>> > > FAQ: http://www.ktmarketing.com/faq.html
>> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>> > >
>> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>> > timg@...
>> > > Moderator: pentam@... indigo_red@... [Moderators]
>> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>> > >
>> > > OFF Topic POSTS: General Machining
>> > > If you wish to post on unlimited OT subjects goto:
>> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
>if
>> > you have trouble.
>> > > http://www.metalworking.com/news_servers.html
>> > >
>> > > http://groups.yahoo.com/group/jobshophomeshop I consider this to be
>a
>> > sister site to the CCED group, as many of the same members are there,
>for OT
>> > subjects, that are not allowed on the CCED list.
>> > >
>> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>THEM.
>> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>> > > bill
>> > > List Mom
>> > > List Owner
>> > >
>> > >
>> > >
>> > > Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
>> > >
>> > >
>> > >
>> > >
>> >
>> >
>> > Addresses:
>> > FAQ: http://www.ktmarketing.com/faq.html
>> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>> >
>> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>> > Moderator: pentam@... indigo_red@... [Moderators]
>> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>> >
>> > OFF Topic POSTS: General Machining
>> > If you wish to post on unlimited OT subjects goto:
>aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
>you have trouble.
>> > http://www.metalworking.com/news_servers.html
>> >
>> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for OT
>subjects, that are not allowed on the CCED list.
>> >
>> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
>DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>> > bill
>> > List Mom
>> > List Owner
>> >
>> >
>> >
>> > Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
>> --
>> Kim Lux <lux@...>
>>
>> Addresses:
>> FAQ: http://www.ktmarketing.com/faq.html
>> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>>
>> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>> Moderator: pentam@... indigo_red@... [Moderators]
>> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>
>> OFF Topic POSTS: General Machining
>> If you wish to post on unlimited OT subjects goto:
>aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
>you have trouble.
>> http://www.metalworking.com/news_servers.html
>>
>> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for OT
>subjects, that are not allowed on the CCED list.
>>
>> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
>DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>> bill
>> List Mom
>> List Owner
>>
>>
>>
>> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>>
>>
>>
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

--
----------------------------------------------------------------------------
RKBA! ***** Blessings On Thee, Oh Israel! ***** 4-19!
----------------+----------+--------------------------+---------------------
An _EFFECTIVE_ | Insured | All matter is vibration. | Let he who hath no
weapon in every | by COLT; | -- Max Planck | weapon sell his
hand = Freedom | DIAL | In the beginning was the | garment and buy a
on every side! | 1911-A1. | word. -- The Bible | sword.--Jesus Christ
----------------+----------+--------------------------+---------------------

Constitutional Government is dead; LONG LIVE THE CONSTITUTION!!!!!

----------------------------------------------------------------------------