CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Circular interpolation G2/3 implementation.

on 2003-09-20 10:36:15 UTC
> I have now obtained some constant current bridge driver
> (http://www.compumotor.com/manuals/OEM/OEM350-650.pdf) They interface at
> rs-232 with the PC and the 650X version can be daisy chained I believe. >

Alastair,

The OEM650 and OEM650X are the same basic drive except the X version has an
indexer board plugged in. Remove the indexer board and (possibly set some
jumpers) you now have a step and direction drive that will use any of the
hobby controller programs out there.

Bill

Discussion Thread

Alastair Reynolds 2003-09-20 07:59:48 UTC Circular interpolation G2/3 implementation. Paul 2003-09-20 08:28:08 UTC Re: [CAD_CAM_EDM_DRO] Circular interpolation G2/3 implementation. Alan Marconett KM6VV 2003-09-20 10:19:14 UTC Re: [CAD_CAM_EDM_DRO] Circular interpolation G2/3 implementation. samcoinc2001 2003-09-20 10:24:35 UTC Re: Circular interpolation G2/3 implementation. William Scalione 2003-09-20 10:36:15 UTC Re: [CAD_CAM_EDM_DRO] Circular interpolation G2/3 implementation. Carey Culpepper 2003-09-20 10:37:58 UTC Re: [CAD_CAM_EDM_DRO] Circular interpolation G2/3 implementation. Alastair Reynolds 2003-09-21 06:56:21 UTC RE: [CAD_CAM_EDM_DRO] Circular interpolation G2/3 implementation. Antonius J.M. Groothuizen 2003-09-21 07:08:07 UTC Re: Circular interpolation G2/3 implementation.