CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Need some help!

Posted by Ed Fanta
on 2003-10-31 11:23:51 UTC
stevenson_engineers wrote:
>
> >--- In CAD_CAM_EDM_DRO@yahoogroups.com, Ed Fanta <atex57@m...> wrote:
> >
> > Nope, nothing so simple. If you look at the shifter cam for the
> > motorcycle and then imagining a raised rib instead of a groove,
> >then a
> > set of cam rollers, one on either side of the rib so it pushs the
> >cam
> > roller mount axially. Ed.
>
> Ed I think I have it.
> Basically what it means is if you can draw it in the flat you can
> then process this in Dolphin with or without offsets, cleaning cuts
> etc automatically.
> When I do the motor cycle cams they supply me with a drawing that is
> just a straight/curved/arced line that is equal to the circumference
> of the shaft, or in my case three of them side by side.
> Dolphin then works this out and converts the linear part into X and
> degree moves for the rotary axis.
> If you want to see what the layout looks like I can email or post
> some screen shots.
> >From a drawing to code on one of these motorcycle cams takes about 3
> or 4 minutes.

Yah, its starting to look like that will be the approach I will take.
For this cam I will probably plot it out, then rewire the machine so it
thinks B axis is X axis. Maybe I'll cut a test piece first. 8-) Ed.

Discussion Thread

Ed Fanta 2003-10-30 14:17:57 UTC Need some help! stevenson_engineers 2003-10-30 16:17:24 UTC Re: Need some help! Ed Fanta 2003-10-30 17:30:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Need some help! turbulatordude 2003-10-30 18:10:08 UTC Re: Need some help! Ed Fanta 2003-10-30 18:48:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Need some help! JanRwl@A... 2003-10-30 21:05:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Need some help! stevenson_engineers 2003-10-31 00:19:34 UTC Re: Need some help! Ed Fanta 2003-10-31 11:23:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Need some help! John Johnson 2003-10-31 18:40:54 UTC Re: [CAD_CAM_EDM_DRO] Need some help! stevenson_engineers 2003-11-01 00:21:24 UTC Re: Need some help! John Johnson 2003-11-01 07:49:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Need some help!