CAD CAM EDM DRO - Yahoo Group Archive

Re: Need some help!

on 2003-11-01 00:21:24 UTC
>--- In CAD_CAM_EDM_DRO@yahoogroups.com, John Johnson <johnatl@m...>
>wrote:
> Ed,
>
> I understand what you're talking about. Give me a little time to
>work
> on the math.
> Basically, the approach to take is by creating the curve in the
>flat,
> that is, substitute X for the A axis. When machining, you can sub A
>for
> X. I'm working out roller and tool offsets and the like. What
>you'll
> need to do is find the angle perpendicular to the curve at some
>point,
> measure out along that angle for the radius of the roller, that
>will be
> the path the roller should be on. From the same point on the same
> angle, move out the radius of the cutting tool, that will be that
> actual cut path.
>
> If you have the curve designed, email it to me and I'll work with
>it in
> TurboCAD. I've been working on radius compensation using VBA in
> TurboCAD, so this is along similar lines.
>
> More later.
>
> Regards,
> JJ
>

Am I missing something here?
If you have the path why not just program that path ????

John S.

Discussion Thread

Ed Fanta 2003-10-30 14:17:57 UTC Need some help! stevenson_engineers 2003-10-30 16:17:24 UTC Re: Need some help! Ed Fanta 2003-10-30 17:30:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Need some help! turbulatordude 2003-10-30 18:10:08 UTC Re: Need some help! Ed Fanta 2003-10-30 18:48:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Need some help! JanRwl@A... 2003-10-30 21:05:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Need some help! stevenson_engineers 2003-10-31 00:19:34 UTC Re: Need some help! Ed Fanta 2003-10-31 11:23:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Need some help! John Johnson 2003-10-31 18:40:54 UTC Re: [CAD_CAM_EDM_DRO] Need some help! stevenson_engineers 2003-11-01 00:21:24 UTC Re: Need some help! John Johnson 2003-11-01 07:49:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Need some help!