Re: [CAD_CAM_EDM_DRO] motor advise needed
Posted by
Dave Fisher
on 2003-11-10 21:05:56 UTC
Please let me first say that I work for Display Electronics in the UK.
Second, I have a keen interest in CNC conversion and hobby tool room
items and currently am building a CNC router. I have learnt a LOT in the
few weeks I have been 'lurking' . I offer the following link to our motors
page not just as an advert, but to hopefully enable other members of this
group
to convert / build their machines in the best possible way.
You may find some interesting motors at:
http://www.distel.co.uk/DC_motors_1.htm
Regards to all
Dave
Second, I have a keen interest in CNC conversion and hobby tool room
items and currently am building a CNC router. I have learnt a LOT in the
few weeks I have been 'lurking' . I offer the following link to our motors
page not just as an advert, but to hopefully enable other members of this
group
to convert / build their machines in the best possible way.
You may find some interesting motors at:
http://www.distel.co.uk/DC_motors_1.htm
Regards to all
Dave
----- Original Message -----
From: "Don Thigpen" <piggy@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, November 10, 2003 6:50 PM
Subject: [CAD_CAM_EDM_DRO] motor advise needed
> first let me say , i am not cheap , however i am on a tight budget
> since i live on retirement income from uncle sam .
> that being said i need to buy some motors to convert my van norman
> no 12 mill to cnc and i cant really afford new ones at this time , i
> will however get gecko 340's and mach2 to run it all. maybe new
> motors late next year as the used ones fail.
>
> so which of these used motors would be a good choice
>
> the pac sci motors here
> http://www.surpluscenter.com/item.asp?UID=2003070308293941&item=10-
> 1931&catname=electric
>
> or the motors here
> http://sales.goldmine-elec.com/prodinfo.asp?prodid=7060
>
> please any advice will be appreciated and i need to order motors
> this week.
> don
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Discussion Thread
Don Thigpen
2003-11-10 15:58:12 UTC
motor advise needed
volitan712003
2003-11-10 17:06:45 UTC
Re: motor advise needed
Dave Fisher
2003-11-10 21:05:56 UTC
Re: [CAD_CAM_EDM_DRO] motor advise needed
piggy
2003-11-10 21:05:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: motor advise needed
Jon Elson
2003-11-10 21:50:53 UTC
Re: [CAD_CAM_EDM_DRO] motor advise needed
Jon Elson
2003-11-10 22:21:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: motor advise needed
Tim Goldstein
2003-11-11 00:42:51 UTC
RE: [CAD_CAM_EDM_DRO] Re: motor advise needed