Re: Screw Size----Stepper Size?
Posted by
surfbuilder2003
on 2003-11-24 09:38:47 UTC
Hello erie,
$10,000 is about our budget, give or take. Precision does not have to
be right on. They will have to be finish sanded once it comes of the
cnc table. I heard that timing belts will slow down the process. I am
a little concerned with time and speed. Someone told me to support
the screw on both ends and something else to help reduce inertia so
it wont be a pain to stop and start. What do you think.
Thanks
Mike
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Erie Patsellis <erie@s...>
wrote:
it if you have trouble.
there, for OT subjects, that are not allowed on the CCED list.
$10,000 is about our budget, give or take. Precision does not have to
be right on. They will have to be finish sanded once it comes of the
cnc table. I heard that timing belts will slow down the process. I am
a little concerned with time and speed. Someone told me to support
the screw on both ends and something else to help reduce inertia so
it wont be a pain to stop and start. What do you think.
Thanks
Mike
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Erie Patsellis <erie@s...>
wrote:
> Mike, I would seriously consider fixed end timing belts, or rack &10'
> pinion. What is your desired resolution and budget?
>
> erie
>
>
> surfbuilder2003 wrote:
>
> >Hey evryone....I have been having great feedback, thanks to all. I
> >have also been looking through the faq page and have been getting
> >some good info from there. I am starting to look for screws and
> >steppers now. However, I do not want to make any critical mistakes
> >and buy the wrong sizes. My table is going to be 10' x 4'. I have
> >gotten some suggestions on my large screw. I heard it needs to be
> >x 1.5" and I need at least a size 42 stepper motor to turn it. Iwant
> >to connect all these directly, no belts or chains. I heard theydont
> >last as long and make everything run slower and less precise. Formy
> >y axis I am going to get a 4' x 1" screw but do not know what sizewanliker@a..., timg@k...
> >motor. And my z axis alls I know is I probably want a 2' screw but
> >dont know what diameter or size motor. There will not be much
> >pressure on the bit as alls I will be cutting is foam. Thanks in
> >advance for any help.
> >
> >Mike
> >
> >
> >
> >Addresses:
> >FAQ: http://www.ktmarketing.com/faq.html
> >FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> >Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> >Moderator: pentam@c... indigo_red@q... [Moderators]aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
> >URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> >OFF Topic POSTS: General Machining
> >If you wish to post on unlimited OT subjects goto:
it if you have trouble.
> >http://www.metalworking.com/news_servers.htmlbe a sister site to the CCED group, as many of the same members are
> >
> >http://groups.yahoo.com/group/jobshophomeshop I consider this to
there, for OT subjects, that are not allowed on the CCED list.
> >THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> >NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> >billhttp://docs.yahoo.com/info/terms/
> >List Mom
> >List Owner
> >
> >
> >
> >Your use of Yahoo! Groups is subject to
> >
> >
> >
> >
> >
Discussion Thread
surfbuilder2003
2003-11-24 07:54:32 UTC
Screw Size----Stepper Size?
Erie Patsellis
2003-11-24 08:30:39 UTC
Re: [CAD_CAM_EDM_DRO] Screw Size----Stepper Size?
ajv2803959
2003-11-24 09:38:47 UTC
Re: Screw Size----Stepper Size?
surfbuilder2003
2003-11-24 09:38:47 UTC
Re: Screw Size----Stepper Size?
Tim Goldstein
2003-11-24 09:44:15 UTC
RE: [CAD_CAM_EDM_DRO] Re: Screw Size----Stepper Size?
Erie Patsellis
2003-11-24 11:31:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Screw Size----Stepper Size?
Douglas Pollard
2003-11-24 15:39:57 UTC
Re: [CAD_CAM_EDM_DRO] Screw Size----Stepper Size?
JanRwl@A...
2003-11-24 18:29:28 UTC
Re: [CAD_CAM_EDM_DRO] Screw Size----Stepper Size?