CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: rs274

Posted by Jon Elson
on 2003-12-02 21:35:03 UTC
asi wrote:

>--- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@p...> wrote:
>
>
>>asi wrote:
>>
>>
>>
>>>hi to all
>>>how or where can i find the RS274
>>>language documentation for the cnc g code "standard"
>>>
>>>
>>>
>>>
>>The official standards document is ANSI/EIA RS-274-D-1980.
>>It is available from the EIA (Electronic Industries Association)
>>for a fee. I think it might also be available from the NTIS.
>>
>>If you really want to learn the language, rather than read a very
>>dry and abstract document meant for computer programmers,
>>the programming manual for any of the major CNC controllers,
>>or a textbook might be a better document.
>>
>>Jon
>>
>>
>hi jon thenks but icant find it ineia website
>if u can help me ther is a link?
>
>
It is a copyrighted document, still available from the issuing agency.
You will not find a copy on the net, period. Don't waste your time
looking. I was able to get an original through inter-library loan, and
made a "fair use" copy for myself. At least, I hope I can claim it is
fair use.

Jon

Discussion Thread

asi 2003-11-30 08:42:39 UTC rs274 Jon Elson 2003-11-30 22:02:47 UTC Re: [CAD_CAM_EDM_DRO] rs274 asi 2003-12-02 11:40:03 UTC Re: rs274 bull2003winkle 2003-12-02 12:53:28 UTC Re: rs274 ballendo 2003-12-02 17:11:26 UTC Re: rs274 Jerry Kimberlin 2003-12-02 18:00:19 UTC Re: [CAD_CAM_EDM_DRO] Re: rs274 Jon Elson 2003-12-02 21:35:03 UTC Re: [CAD_CAM_EDM_DRO] Re: rs274 Jon Elson 2003-12-02 21:39:24 UTC Re: [CAD_CAM_EDM_DRO] Re: rs274 bull2003winkle 2003-12-03 05:56:30 UTC Re: rs274 asi 2003-12-03 15:05:12 UTC Re: rs274 Jerry Kimberlin 2003-12-03 17:41:15 UTC Re: [CAD_CAM_EDM_DRO] Re: rs274 asi 2003-12-04 04:50:13 UTC Re: rs274