CAD CAM EDM DRO - Yahoo Group Archive

Re: Transformer source

Posted by cncgramps
on 2004-01-12 16:20:03 UTC
That is the raw AC voltage.

Thanks

Gary

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Thomas Powell" <tppjr@h...>
wrote:
> Is that the raw AC voltage or after rectified?
>
> Thomas
> ----- Original Message -----
> From: "cncgramps" <cncgramps@y...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Monday, January 12, 2004 4:33 AM
> Subject: [CAD_CAM_EDM_DRO] Transformer source
>
>
> > Looking for a good source for a transformer of 50-54 volts 1KVA.
> >
> > Thanks
> >
> > Gary
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@a...,
> timg@k...
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
> [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
to be a
> sister site to the CCED group, as many of the same members are
there, for OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Yahoo! Groups Links
> >
> > To visit your group on the web, go to:
> > http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
> >
> > To unsubscribe from this group, send an email to:
> > CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >
> > Your use of Yahoo! Groups is subject to:
> > http://docs.yahoo.com/info/terms/
> >
> >

Discussion Thread

cncgramps 2004-01-12 06:33:32 UTC Transformer source Thomas Powell 2004-01-12 08:22:50 UTC Re: [CAD_CAM_EDM_DRO] Transformer source cncgramps 2004-01-12 16:20:03 UTC Re: Transformer source JanRwl@A... 2004-01-12 20:48:58 UTC Re: [CAD_CAM_EDM_DRO] Transformer source cncgramps 2004-01-12 21:12:14 UTC Re: Transformer source eewizard_1 2004-01-12 22:38:07 UTC Re: Transformer source stokessd 2004-01-13 06:50:20 UTC Re: Transformer source John Johnson 2004-01-14 05:39:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Transformer source