Re: [CAD_CAM_EDM_DRO] Re: Transformer source
Posted by
John Johnson
on 2004-01-14 05:39:31 UTC
If you use a variac, be sure you have a transformer on the output side,
otherwise,
the output is not isolated from the line input, and presents a hazard.
Regards,
JJ
otherwise,
the output is not isolated from the line input, and presents a hazard.
Regards,
JJ
On Tuesday, Jan 13, 2004, at 01:35 US/Eastern, eewizard_1 wrote:
>
> Hi Gary
>
> One thing that can get you close is a 240-115 isolation transformer,
> like you can find to run European equipment. Put 115V on the 240V
> side to get about 55V out of the 115V side. Just watch the current
> rating. Another way is look on eBay for a Variac and get any output
> you want. Either way is probably a more common find at that power
> level then something made for what you want.
>
> Al
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "cncgramps" <cncgramps@y...>
> wrote:
>> Looking for a good source for a transformer of 50-54 volts 1KVA.
>>
>> Thanks
>>
>> Gary
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
> it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be
> a sister site to the CCED group, as many of the same members are
> there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
Discussion Thread
cncgramps
2004-01-12 06:33:32 UTC
Transformer source
Thomas Powell
2004-01-12 08:22:50 UTC
Re: [CAD_CAM_EDM_DRO] Transformer source
cncgramps
2004-01-12 16:20:03 UTC
Re: Transformer source
JanRwl@A...
2004-01-12 20:48:58 UTC
Re: [CAD_CAM_EDM_DRO] Transformer source
cncgramps
2004-01-12 21:12:14 UTC
Re: Transformer source
eewizard_1
2004-01-12 22:38:07 UTC
Re: Transformer source
stokessd
2004-01-13 06:50:20 UTC
Re: Transformer source
John Johnson
2004-01-14 05:39:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Transformer source