Re: [CAD_CAM_EDM_DRO] Galil controllers compatible softwares

I have galils DMC to G-code conversion software. It is customizable you can
add g and m codes. The software works with all galil controllers.
If you are interested email me offline.
shawncd@...

----- Original Message -----
From: "Peter Renolds" <prenolds@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, January 17, 2004 10:59 AM
Subject: Re: [CAD_CAM_EDM_DRO] Galil controllers compatible softwares


> Have you looked at the two leads I gave you back on the 9th of Jan? I'm
> not aware of any other retrofit type systems based on Galil cards, but
> they may be out there. Just becasue you have the Galil card, you may
> still want to consider the parallel port control options such as Mach2
> and others discussed regularly on this list.
>
> From my research before buying and my satisfaction after selecting the
> JRA system I don't think you will get a better bang for your buck than
> with the JRA system, assuming you already have the (expensive) Galil
> card. You can pick up AMC analog drives cheaply on eBay, typically
> around $120 - $130 per axis. FYI, I don't think there are many people
> on this list that use a Galil based controller for their CNC projects.
>
> Contact the vendors and ask them for references - that's what I did and
> it was very enlightening. In the end, you have to decide which control
> best meets your needs and budget.
>
> Cheers, Peter
>
> Mouss_T wrote:
>
> > I need opinions about Galil controllers compatible softwares, which
one
> >is good or
> >
> > is there enough alternative to choose.
> >
> >
> >
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>