Re: [CAD_CAM_EDM_DRO] Pwm control & Spindle input

Jack
Try this link http://groups.yahoo.com/group/mach1mach2cnc/ and look in
the files section
I believe they have some drawing there. If that's no help contact me off
list and I will help you.
james_cullins@...
Jim Cullins

----- Original Message -----
From: "Jack Hoffa" <jack.darlene.hoffa@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, January 24, 2004 11:14 PM
Subject: [CAD_CAM_EDM_DRO] Pwm control & Spindle input


> Help-For Elect. Dummy Running Mach2 (I tried that group but no Help)
> 1. From PWM control in Manual (4.7.3)how do I convert the PWM signal
> to 0 to 10 volts?
> 2. I have a 15 to 34 volt inductive proximity switch (NPN) and a 18
> volt power supply. Can I use this for the input to the index input
> pin? 6.1.5 of Manual
> I have a Hitachi SJ100 (3HP) Inverter. My Mill has a 2HP 3P motor
> that is currently running from a rotary phase converter.
>
> Thanks in advance for the Help
> Jack Hoffa
> jack.darlene.hoffa@...
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>