Re: [CAD_CAM_EDM_DRO] Newbie - Z-axis slipping
Posted by
Kib Kibel
on 2004-01-30 19:01:48 UTC
It might be that the bit is slipping due to dullness and after hole no 25
the extra force needed was able to partly overcome the clamping force of the
bit.
the extra force needed was able to partly overcome the clamping force of the
bit.
----- Original Message -----
From: "Janice" <bigforkshop@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, January 30, 2004 7:57 PM
Subject: [CAD_CAM_EDM_DRO] Newbie - Z-axis slipping
> I'm brand new, self taught on my CNC router/engraver. I am
> currently using a single drill point function where I am drilling 30-
> 90 holes per part, at a precise depth of 0.043. I am losing depth
> starting at about hole 25, and losing up to .030 worth of depth over
> the course of the remaining holes. Am I expecting an unreasonable
> level of precision, or are there some explanations for why a Z-axis
> would lose depth? Thanks in advance!
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
Discussion Thread
Janice
2004-01-30 14:39:19 UTC
Newbie - Z-axis slipping
Dave Fisher
2004-01-30 14:51:35 UTC
RE: [CAD_CAM_EDM_DRO] Newbie - Z-axis slipping
Vajk Fekete
2004-01-30 15:28:24 UTC
Re: [CAD_CAM_EDM_DRO] Newbie - Z-axis slipping
Statman Designs, LLC
2004-01-30 16:21:21 UTC
Re: [CAD_CAM_EDM_DRO] Newbie - Z-axis slipping
Kib Kibel
2004-01-30 19:01:48 UTC
Re: [CAD_CAM_EDM_DRO] Newbie - Z-axis slipping
Jon Elson
2004-01-30 20:12:32 UTC
Re: [CAD_CAM_EDM_DRO] Newbie - Z-axis slipping
Bob McKnight
2004-01-30 20:24:38 UTC
Re: [CAD_CAM_EDM_DRO] Newbie - Z-axis slipping
industrialhobbies
2004-01-30 21:10:31 UTC
Re: Newbie - Z-axis slipping
jmosufsen
2004-01-30 21:30:24 UTC
Re: Newbie - Z-axis slipping
ballendo
2004-01-31 12:53:51 UTC
Re: Newbie - Z-axis slipping
brian reid
2004-02-03 15:31:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Newbie - Z-axis slipping
Dave Fisher
2004-02-03 16:42:37 UTC
RE: [CAD_CAM_EDM_DRO] Re: Newbie - Z-axis slipping
Terry Owens
2004-02-03 17:03:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Newbie - Z-axis slipping